Descktop Board G31 MXP - Foxconn Computers & Internet

You must have Blackberry Descktop Software installed on PC first
1 step: do backup data from your phone using Descktop Software
2 step: full wipe device from security options\wipe data
3 step(last): restore data using Descktop software

WHAT ARE THE PROBLEM.

Hello here is the homepage:

http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000416

The drivers for your windows system can be downloaded, by click on the tech support.

What`s the problem ?

The Intel DG31PR motherboard uses an Intel G31 motherboard chipset;

A) Intel 82G31 - Northbridge chip
B) Intel 82801GB (ICH7) - Southbridge chip

http://en.wikipedia.org/wiki/List_of_Intel_chipsets#Core_2_chipsets

Scroll down to the subheading - G31 in the left column.

The Southbridge chip controls the SATA bus.
The SATA bus uses SATA technology, that operates UP TO 3Gbps.
3 Gigabits per second.

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

The SATA 3.0 technology operates at 6Gbps.
6 Gigabits per second.


SATA revisions were made to be both Backward Compatible, and Forward Compatible.

However it depends on the manufacturer of the harddrive, as to how to switch it,

http://en.wikipedia.org/wiki/SATA#SATA_1.5_Gbit.2Fs_and_SATA_3_Gbit.2Fs

The answer is yes.
You will not get the full capability of the SATA 3.0 technology, however.
The harddrive will be operating at the SATA 1.5 technology.

Regards,
joecoolvette

[ Here is the Technical Product Specifications for the Intel DG31PR motherboard,

http://www.intel.com/support/motherboards/desktop/dg31pr/sb/CS-029381.htm

Click on in blue -
Intel Desktop Board DG31PR Technical Product Specification [PDF]

Page 10 - Peripheral Interfaces
- Four Serial ATA (3Gbps) interfaces -

This is a known symptom of a failure in the power supply board. Here is a link to a repair guide that shows how to dis-assemble and the unit and then what to look for and replace on the power supply board to bring the unit back to working condition.

http://www.ccl-la.com/blog/index.php/repairing-a-samsung-940n-with-a-blinking-power-light/

And here is a picture of the power supply board that needs to repair.




I hope this helps, if so please rate my solution.

BuddyMc

Hi, you can download the driver here:

http://www.biostar.com.tw/app/en/mb/driver.php?S_ID=363

Its not for windows 7 but it will probably run on your system.

X86 is for 32 bit and X64 is for 64 bit system.

Try the xp or vista driver.

Hope this will help you.

G32 board has no agp slot ....
and the card you are using is AGP NVIDIA GE FORCE XFX 5500 ...
g31 has 16x pci slot so buy PCI card not AGP...

The 8800 GS is nice but the 9800 GTX+ is really fine;
http://www.nvidia.com/object/product_geforce_9800_gtx_us.html
Get all you're nvidia updates here; http://www.nvidia.com/Download/index.aspx?lang=en-us

Cheers'
Mike

http://www.ecsusa.com/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=812&DetailName=New&DetailDesc=&CategoryID=1&MenuID=6&LanID=0

Please Rate My Solution Below
Kind Regards
1234s282

http://www.newark.com/littelfuse/0215008-mxp/cartridge-fuse/dp/42K9308

Fuse is a "Littelfuse 0215008.MXP"
8A 250V Slow-blow ceramic