Panasonix tx L32S20BA

It is evidently

Creative Sewing Center
11777 WEST AVENUE
SAN ANTONIO , TX 78216
210-344-0791
.
.

Internal power supply issue

Remove the batteries for 60 seconds, at the same time press power and hold for the juration of the time, this will remove residual voltage and reset the processor ic, "long shot" if no change the zoom part of the lens is malfunctioning, the zoom motor or gears are jammed.

http://www.youtube.com/watch?v=gj0x5S9ez5U

This is the tutorial on how to fix the hdmi handshake issue you are probably experiencing

Hi
Before connecting it to your Tv try to turn down your resolution settings on your laptop to 680 or something, Maybe your TV does not support the resolution your laptop is in at the moment.

Below is a link to your free manual and thanks for using Fixya!

Panasonix KX-FHD331

ลงคอมแล้วเล่นวีดีโอแล้วไม่มีเสียง ของโปรแกรมที่สามารถใช้งานกับกล้องรุ่นNV-GS55

I contacted the dealers where I bought the amp and they suggested that I connect speaker cable to both the left and right front speakers and use that to connect the subwoofer.

However, whilst this has worked (sort of) it is evident that to achieve the best results, I will need to replace my existing sub with a powered one in the near future.

Only a temporary fix I'm afraid, but it got the job done.

Yo do not need software drivers to operate this camcorder.
Full instructions can be found at
http://panasonic.co.uk/customer-Support/download-centre.asp
Let me know if this helps.

from LANCE P: I fixed it. Be sure that all your speaker connections are perfect. No element frays that can arc, no +/- problems, no single barely connected wire. My problem was volume sensitve and I evidently had one + wire that was loose in the back. I corrected it and ran it all day with surround and good volume with no problems. So diligently check ALL YOUR SPEAKER CONNECTIONS, both in the back of the unit and at your speakers