Question about Netopia ADSL 2+ MODEM 10/100 EN AND USB FIREWALL SECURITY Router (2241NVGX)

1 Answer

Netopia modem How do I unlock the usb port on my netopia modem?

Posted by on

Ad

1 Answer

Go to control panel press on add/remove hardwear and when promted to search for new hardwear press on next.And continue as if installing a new hardwear and you will reenable your USB port.

Posted on Aug 28, 2007

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: netopia adsl modem

I don't understand what you mean by "Unlock" the USB? I presume you perhaps mean how can you "Use" it? The USB Port. What needs to done in this case, is to Install the "Driver" that will allow the "System" to "See" the USB Device.. When you plug the Device into the PC, with ya USB lead, the PC should "See" it, beep twice, and if it hasn't been installed B4, will, if it cannot find any "Generic Drivers", then, "Ask" for "Drivers". (These may be on CD etc.) When windows has installed the USB "Drivers" your device will be ready to be used. Some Modems have Both an Ethernet connection & a USB one too... this allows two (2) ways to connect it to your "System" OR two (2) ways to be connected to the modem for two (2) PC's simultaneously. The Ethernet one generally has the address 192.168.0.*. Whereas the USB one is generally 10.0.0.*,or 10.1.1.* You can also "Bridge" these two together.

Posted on Aug 18, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Good day! I have try to upgrade my Netopia 2247NWG-EIR firmware, but unfortunately my modem was hang. After power reboot my modem now not responding to any answer. But indicator of ethernet ports is light...


hello arthur, you wont need the eircom firmware you just need a firmware update for the netopia 2247nwg-vgx

go here fill out the details and download the firmware and update the router with it

http://www.netopia.com/support/hardware/firmware/updates.html?224xw

Feb 27, 2011 | Netopia 2247NWG-VGx Wireless Router...

1 Answer

I need to find a driver/sortware program to get my netopia 3D reach wireless adapter up and running. all i can find are these driver scans that want me to install them and scan my computer to tell me I...


Here's a driver-free, software-free solution.

Turn your cable-modem (or DSL-modem) off.
Turn your Netopia off.

Connect:

Ethernet--port on cable-modem <-- cable --> WAN port on Netopia.

One LAN port on Netopia <-- cable --> network-port on your computer.

Turn the cable-modem on, and wait until its lamps settle-down to a repeating pattern.

Turn the Netopia open, and wait until its lamps settle-down to a repeating pattern.

Restart your computer.

Click Start
Click Run
Type CMD
Press Enter
Type IPCONFIG
Press Enter
Look for output like: Default Gateway ... 192.168.123.456
Start Internet Explorer
Type http://192.168.123.456 (or whatever numbers you see)
Login to the web-server running "inside" the Netopia.
Click to run the "Wireless Networking Setup Wizard".
Enter an SSID of your choice.
Select the 'WPA' level of encryption.
Enter a network-password of your choice.
Click OK
Restart the router (if it did not automatically restart).

Disconnect the Ethernet cable from your computer's network-port.
Click "View Available Wireless Networks".
Click the SSID of your new network.
Click Connect.
Enter the password, when prompted.
Voila! You have a wireless connection to the internet.

Oct 24, 2010 | Netopia 3-D Reach (TER/GUSB-N1)...

1 Answer

Ethernet port is ''locked'' dsl modem


reset your router to factory default....look for a small button on the router and keep pressing it until all the lights blink together at once.....do reply back

Nov 11, 2009 | Computers & Internet

2 Answers

I have a netopia wireless router, I've just had comcast install the internet however I would like to install the router. the modem to my computer accommodate only one ehternet cable at a time and it...


You can connect your computer to Internet if you have a Wi-Fi card in the computer. You need to connect the modem ethernet cable to the netopia wireless router and then connect to internet through wireless connection. First task is to configure wireless network connectivity on your netopia router connecting the 1st ethernet port to your pc lan card port, you will need the netopia instruction manual for this. The wireless configuration will be through a browser window(like internet explorer/mozilla firefox). This may take roughly 20 -30 minutes.

Jul 25, 2009 | Computers & Internet

1 Answer

AT&T Netopia DSL modem not opening ports for web servers


Try to open the required ports of your web server on your router.

Mar 05, 2009 | Netopia ADSL 2+ MODEM 10/100 EN AND USB...

1 Answer

Connecting a linksys wrt54g to a netopia modem


Is this an ISDN modem?

Generally: Netopia Ethernet out -> Linksys WAN port with a standard ethernet cable.
(Not the yellow LAN ports! - They are for your computers/printers.)

Dec 28, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

Netopia 2241 Modem losing sync?


If your modem is losing sync with ADSL 2 that means that your line has a problem. Try having your DSL provider move you to a new Cable and pair.

Sep 11, 2007 | Netopia ADSL 2+ MODEM 10/100 EN AND USB...

1 Answer

Netopia adsl modem


I don't understand what you mean by "Unlock" the USB? I presume you perhaps mean how can you "Use" it? The USB Port. What needs to done in this case, is to Install the "Driver" that will allow the "System" to "See" the USB Device.. When you plug the Device into the PC, with ya USB lead, the PC should "See" it, beep twice, and if it hasn't been installed B4, will, if it cannot find any "Generic Drivers", then, "Ask" for "Drivers". (These may be on CD etc.) When windows has installed the USB "Drivers" your device will be ready to be used. Some Modems have Both an Ethernet connection & a USB one too... this allows two (2) ways to connect it to your "System" OR two (2) ways to be connected to the modem for two (2) PC's simultaneously. The Ethernet one generally has the address 192.168.0.*. Whereas the USB one is generally 10.0.0.*,or 10.1.1.* You can also "Bridge" these two together.

Aug 18, 2007 | Netopia ADSL 2+ MODEM 10/100 EN AND USB...

Not finding what you are looking for?
Netopia ADSL 2+ MODEM 10/100 EN AND USB FIREWALL SECURITY Router (2241NVGX) Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Netopia Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

marty morrison
marty morrison

Level 2 Expert

26 Answers

Are you a Netopia Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...