I just got 2 Motorola Visar and i'm looking for an owner's manual to learn using them. Can you help me?

This is a discontinued radio from Motorola. programming requires a cable to connect to a computer, there is no direct programming available.
While this is not really an answer, the programming software is specific to Motorola and you need to buy both the software and the cables from Motorola.
you would be better served, to determine what frequencies you want and then pay a certified Motorola dealer who has the software to do the work for you.

Motorola Owners Forum there you can go and learn about your mz604

Hi Joseph,

I'm not sure if there is a yahoo group for these, but you can try yahoo group and type in your radio Make/Model, to see if one is there, otherwise I'm sure someone reading these pages might be good enough to pm you a copy.

Give it a go, maybe you'll get lucky.

Regards,
Peter

These radios were available in many frequency ranges from VHF through 800MHz. You can decode your radio's model number to tell what band your radio should be in.

You can use this chart to decode your model number. See http://www.batlabs.com/visar.html for more information about these radios.

Do you mean Motorola Visar?
If that what you are asking no it is not.

Hello, Here is a link to the manual. Hope it helps.

The Visar has a channel lock feature. If you hold down the two channel buttons at the same time, it will do one of two things depending on the settings. Either the channel will lock, or the channel numbers in the LCD will flip.
If you press the channel button and the "popples" "pop" (for lack of a better word) then the channel selection buttons re most likely OK. To fix it you just press both channel buttons at the same time for about 5 seconds. It will beep and you should be able to change the channels. If not, then it needs to be repaired.

If you need to re-program the GP340's here is a link to some software on Ebay. You would need to buy a cable to connect the radio to the pc, but these cables can be found on Ebay also.

try starting here: http://direct.motorola.com/hellomoto/nss/v3xx_ENS/main.html

The problem is... the features are software programable. An owner's manual would be of little help. You need to talk to the Tech or Service Co. that originally programmed the pager.

Geno