Question about Canon PowerShot SD750 / IXUS 75 Digital Camera

1 Answer

IXUS 75 has blank LCD screen

The camera powers up and everything seems to be working, but I cannot see anything on the screen. When I connect the camera to my TV screen I can see the viewfinder, browse pictures etc. Any ideas? thanks, Simon

Posted by on

  • Anonymous Jan 12, 2008

    Same problem - camera only 3 weeks old. Screen failed after down-loading images to the PC. Everything else seems fine.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

A screen fails in one of two ways. 1.Backlight goes- If looked at closely or to one side the images are there as ghosts but not illuminiated. 2. Connector or board component has failed which could mean with a back light Okay a brilliant white screen. Failure 1 - nothing for you to do there Failure two -if it is a connector- gently flexing the camera casing in the region of the base of the screen may elicit a reconnect. In either case however- I think you will find that unless it is under warranty or insured in some way- New camera will be a more economical approach. But check out makers support site first.

Posted on Aug 18, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The LCD display screen is blank, back-light remains on. Powering off machine to power back on results in loud, abrasive rattle which seems to come from scanner. Unable to do anything with device.


When this happens the first thing you should do is check the connections to the LCD screen. However if it was working fine before this is most likely not necessary since they have to be connected properly to show anything. After that you would need to replace the LCD or the Logic board. If everything else is working properly then the problem is more than likely the LCD needs to be replaced.

Mar 12, 2014 | Brother MFC 6490CW InkJet Printer

1 Answer

On my GE E1050TW digital camera, when i start it up, it has a list of options such as '640x480p NTSC 4:3' and '720x576p PAL 16:9'. When i choose one of these options, another screen comes up with three...


These are output settings for when you want to connect the camera to a tv. If you were connected to a tv, when your screen goes blank, the picture would appear on the tv screen.

Nov 29, 2010 | General Electric Cameras

1 Answer

Screen and view finder not showing anything


Just covering the bases...
Make sure the lens cap is removed
Turn the ON/OFF switch to Favorite mode
Press EVF/LCD does it toggle
Look to see if the battery level ICON shows better then half
Battery combination sometimes will show a strong icon level
It may be strong in the other modes which draws less power then the picture taking mode.
My guess would be New Battery replacement.
Some tests were done that may be of value to your solution

http://reviews.cnet.com/digital-cameras/kodak-easyshare-z740/4505-6501_7-31294317.html

Jun 13, 2010 | Kodak EasyShare Z740 Digital Camera

1 Answer

Dropped my camera,screen is white and wont display anything


Try and remove the batteries and wait then a few minutes, then reinsert them and see if that works.

Jan 16, 2010 | Cameras

1 Answer

Olympus Stylus 1030 SW display not working after being in water


I just had a similar problem. I am not sure how it was fixed, but it works again - at least for now.

I had the camera on and was taking pictures when the screen went dark. Same as you describe, it takes pictures, flash works, LED, works, everything but the display. I plugged it into my computer with the USB adapter to see if I can salvage what is on the card and the diplay lights up. Tried several variations, but when the cable is connected to the computer (didn't have to be connected to the computer) the screen worked. Unplug, no display. I spun the settings button a couple of times. I accidentally took a couple of short videos and pictures that I deleted. I unplugged the camera and powered down again (tried that before). Power up and the screen is fine.

Again I have no idea what fixed it or why the display worked with the cable plugged in. It might have been related to the videos or some setting that I had slipped into (thought the display button never worked or changed anything).

Hopefully something in there helps or someone can explain what I did.

Oct 18, 2009 | Cameras

1 Answer

I have two DMC-FX3 cameras with the exact same screen problem


There seem to be a loose connection between the LCD and the rest of the camera. When you open the shell open the connection completes, but when you close it the connection stretches and snaps. So, please visit the service center of the brand and get it checked and rectified.

Aug 27, 2009 | Panasonic Lumix DMC-FX3 Digital Camera

1 Answer

Ps3 nodisplay, although I reset output video


minhpham have to tried to insert any disc like moves, song differnt game frm call duty.

and if it dosnt work let me knw.

abdz

Sep 16, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Screen has gone white


Either your LCD is damaged or the cable connecting it to the rest of the camera is loose. I would suggest taking it to be repaired.

Sep 09, 2008 | Canon PowerShot A540 Digital Camera

Not finding what you are looking for?
Canon PowerShot SD750 / IXUS 75 Digital Camera Logo

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

TC CAMERA REPAIR.Com...

Level 2 Expert

176 Answers

old marine
old marine

Level 3 Expert

2237 Answers

Doberman

Level 2 Expert

261 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...