Question about Sony Cyber-shot DSC-T10 Digital Camera

2 Answers

Regarding focus error on switching "on" camera

Dear Sirs, This is to kindly let you know that I am a professional camera technician. Presently I am having Sony DSC T10 camera under repair. The problem is that when I switch on the camera the picture is not seen clearly on the LCD and the camera makes some noise until the blurr image is seen. Please help me in this matter. Thanks Heero

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Regarding focus error on switching "on" camera

Pleas help me.i hav a sony dsc t1o , and when i take a photo its saved like a black photo, what can i do?
my email is thnks

Posted on Feb 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Regarding focus error on switching "on" camera

Hello, I have same problem with dsc-t10, when I open my camera than I found 3 motors, two of them on the right of the lens, these are to adjust the focus. One of them was broken.

Posted on Jan 23, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

System Error (Focus)

The systems control board has detected a problem with the auto focus lens, the focus is controlled by a tiny motor that has jammed or there is a mechanical issue with the camera lens. It will require a technician that is highly skilled to deal with the situation, but the repair cost would probably not be justified.

Jan 12, 2011 | Panasonic DMC-FX37 Digital Camera

2 Answers

E:61:00 on the display

E:61:00 means "Difficult to adjust focus Inspect the lens block focus reset sensor"
The simple solution to fix that error message was to the let the lens fully extend and give the lens a good whack. Possibly this error message for this means, that the auto focus motor was past the maximum set point.
and do rate the solution if helped

Dec 06, 2010 | Sony Cyber-Shot DSC-P71 Digital Camera

1 Answer

My camera will not focus


Do you get any error code, like a focus error, or a lens error?

Let em know.

Kind regards

Nov 21, 2010 | Canon PowerShot SD1300 IS IXUS 105...

1 Answer

Focus Error when I turn on the Finepix A600


The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.


Jan 10, 2010 | Fuji FinePix A600 Digital Camera

1 Answer

My camera is set on lock, how do I unlock it (fuji s5200)


Are you pertaining to the Focus mode? If so you can unlock it using the Focus mode selector lock switch. Press the Focus mode selector button to change the focus mode.

S-AF- Single AF
M-F- Manual Focus
C-AF- Continuous Focus

I would like to know more information regarding this matter.

Aug 15, 2009 | Fuji Digital Cameras

1 Answer

Regarding fixya forum . query regarding cam issues

I just read that post you're referring to I think... I tried it on mine however it didn't solve my problem but it might solve yours...

Here goes...
-push menu
-arrow all the way over to the right until you get to settings
-arrow down two click till you get to setup 1
-go down to initialize and click ok
-it will turn on and off then you need to re enter time and date

hope thats what you wanted...

Jun 01, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

3 Answers

Focus error

The zoom and focus operate on screw thread drives. 1 of these has detatched resulting in "ZOOM ERROR" and locked the camera up. Dis-assemble lens and re-attach drive.

May 25, 2008 | Fuji FinePix S5200 / S5600 Digital Camera

1 Answer

Pentax Espio 115 exhibits an H3 error and camera does not work. Sometimes it's a H2 or 1 error. What does this mean.

RE: Pantax ESPIO 115

Dear Sirs,

I bought the Pentax espio 115 Camera in Tokyo and have been well using but it was out of order suddnly .I could find in Lcd panel appeared <H3 mark>and not worked after.
Kindly let us know as quickly as possible what should I do shoot the trouble..??!
Awaiting your kind response.....
Thank you.

Mr.U.S,Yu?South Korea

Mar 21, 2008 | Digital Cameras

1 Answer

Blurred monitor

There's a Canon service advisory regarding possible malfunction of the CCD image sensor in your A75. Call their technical support line at 800-828-4040 (USA only) and a technician will determine if this could be your problem. If they suspect that your camera qualifies under the service advisory, they'll provide a prepaid UPS shipping label so you can send the camera in for evaluation / repair.

Jan 17, 2008 | Canon PowerShot A75 Digital Camera

1 Answer

Regarding Error #45

Well Heero if you are the tech guy you say you are- and Kodak arn't helping you- this suggests a mainboard failure and the camera is not going to get repaired.

Jun 05, 2007 | Kodak EasyShare LS443 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot  DSC-T10 Digital Camera Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Digital Cameras Experts

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

74 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Sony Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides