Question about Dell 5110cn Laser Printer

1 Answer

Error 016-313 upon power up i keep getting a 016-313 code and it tells me to restart the printer. after restarting it shows the same thing

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 35 Answers
Re: error 016-313

Try a firmware update.

if that doesn't solve it, reseat controller card.

if that doesn't solve it, replace controller card

For the 370 error, try the same steps. If they don't solve, then replace the Machine Control Unit.

Replaceing these parts can get expensive.

Posted on Jun 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

21.2:13 error code HPT770

21:2.13 error- service station fail- these can be ordered but need fitting by an approved engineer
part number CH538-67040

Dec 30, 2013 | HP DESIGNJET T770 Printer

2 Answers


Please reply with exact error so that we can find solution....................thanks.

Jul 02, 2008 | Dell 5110cn Laser Printer

1 Answer

Error code 21.1:03

there is a solution in the user manual but the best place is to go to office equipment repaerer tyhats vlokal to you

Jun 17, 2013 | HP DesignJet Z2100 InkJet Photo Printer

1 Answer

My konica Minolta buzhub 362 copier shows error 3452

Restart the machine.If code removes then its OK, otherwise press the utility/counter button and restart the machine.Don not leave the button.Keep the button pressed.Trouble reset will appear on screen hit it and restart the machine.

Nov 21, 2012 | Konica Minolta Bizhub 362 Copier

8 Answers

Toshiba estudio 166 C44 error code

Hold "0" and "8" while turning on machine.....continue holding until machine enters service mode. Enter "400" press enter. Enter "0" press enter. Power off / on. If code returns, machine needs parts replaced. Do Not keep resetting, may cause damage to Fuser Unit.

Aug 27, 2009 | Toshiba e-Studio163 Copier

1 Answer

HP 8250 Printer restarts after shut off

i have a problem with my hp 8250 the error code Oxc18a030a keeps on coming up and says to put my 8250 off than on every time i do this the same message appears

May 16, 2009 | HP Photosmart 8250 InkJet Printer

1 Answer

Error Code E000732-001

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 07, 2009 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

Paper has jammed showing error code 0000064 and inform to restart

canon3000 err code 64 restrt machine 10 to20 copy after code please help me

Dec 16, 2008 | Canon MF8180C Color Laser MFC Printer

5 Answers

Riso HC5500 System Error - Restart!

I need help with the error code. s04-307 in my riso hc 5000

Oct 22, 2008 | Printers & Copiers

1 Answer

OKI 9800 with "342" error code

problem might be with toner recycle coil which runs around the back of the belt unit. as the cyan unit is the furthest down the line if any blockages occur it can back up and lift the drum unit up. check the square opening of the recycle unit on the cyan end. Make sure you change waste toner unit when prompted or you might break a gear (big job) Karl Oki engineer

Aug 24, 2007 | OKI 9800hdn Laser Printer

Not finding what you are looking for?
Dell 5110cn Laser Printer Logo

Related Topics:

1,332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Printers & Copiers Experts

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers


Level 1 Expert

3 Answers

Are you a Dell Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides