Got a HanShing Packet Cam 305 but am missing the CD to install soft needed to run it.
Could I buy a copy from U or get drivers sent by attachment?
Glad to pay for a CD.
John Paul Loucky firstname.lastname@example.org
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Which driver did you try to install?
Try this one;
Click halfway down where it says "treiber download" - sorry website is in German - the driver itself once downloaded is all in English.
If you still need to contact Hanshing, you can email them from this link;
click on "contact us" at the top right
Hope this helps :)
And then you can download a program called "Driver genius" from link
it is a trial program for 15 days
dont worry we only need it for 5 minutes
Install & run the program & in the windows click on the update the drivers
Itwill check & it will give the window with the drives that needs tobe updated & it will not update a it is a trial one.
youjust right click on the driver name, you will get a message
called'copy url address 1' copy that & open the orbit downloader
&click on the create new download & paste the link the drivers
willbe downloaded for free.
Some sites give these drivers only
forthe money & we cannot be able to find them from the free sites,
soi think this would be a nice trick.
go to allibaba.com and download the enet cam driver.otherwise buy the driver and install it.
If there is an option called "computer" "storage" "mass storage" or something like that on the camera, set it to that setting before plugging it in to the computer.
Once you plug it into the computer, your PC should recognize the camera and install the necessary drivers.
Those kinds of cams most of the time, unless they are able to be used as a webcam, do not "send" or "receive" any information over the usb cable unless they are on the correct setting, which is probably why your computer isnt seeing it.
I hope that this helps to solve your problem, good luck!
i just bought the same camera and it wouldn't work with the cd either. i had to make sure that on the camera it was set to "pc" and that "mass storage" was selected before plugging the camera into my pc. hope this helps.