Kenmore Seriies 80 gas dryer
Model #76822690
Dryer was working fine and just stopped turning on. When the start button was pressed it ''buzzed'' but would not start.
The next day dryer started right up and ran for about 2 hours - then stopped again. Buzzed for a couple of pushes of the start button and then stopped all together.
I cleaned out the vent and lint screen and dryer started again.
Next day, only buzzed when pushing start button - but would not start.
Today, started fine and ran for a few hours but started to have a ''electrical'' smell so we turned it off.
I also checked to see if the air flow was appropriate - air flow was fast and very warm.
No consistancy on whether or not it will start - now we have to hold the button in for a few seconds before it will start....that is, when it actually starts.
I also really need a schematic of the dryer.
Go to www.repairclinic.com and enter your model number and it will show you all your parts, but I suggest you change your thermostats and basically have the dryer cleaned out of possible lint build up on the interior
366 views
Usually answered in minutes!
×