My PC screen is not well desplaying in one of its screen part

Hi..
Try to open the RAM from the device clean the RAM and slots then install it back and now check it..
still problem persists that might be problem with ur monitor resolution?? if its.. then check with another monitor.....

http://en.community.dell.com/support-forums/desktop/f/3514/p/19348729/19758657.aspx

already i have posted.just check out

restart you PC and bring it up in Safe Mode. After logging on right click on the desktop and select screen resolution. Select a lower resolution on the next screen click OK and restart your PC

E0 error - ensure pot or pan is placed correctly
E1 error - the circuit has malfunctioned
E2 error - the temperature sensor is opening circuit or short circuit
E3 error - the voltage is higher (140 - 160V) for 3 seconds
E4 error - the voltage is lower (80 - 100V) for 3 seconds
E5 error - the cooktop surface temperature is too high
E6 error - Internal electronic temperature is higher than normal for 3 seconds
E7 error - Internal electronic temperature sensor is opening circuit or short circuit

Press the kph/mph button

pls replace your lcd screen

Sounds like you have a lcd problem. Try sending it to an ipod repair service http://www.ipodrefresh.com for a diagnostic test.

What do you wan to yaar , You want to maintain your printer na , Clean it with ip liqid and remove its dust , Then put the oil after cleaning the Rod, where head is moving here and there

There are many possibilities.
This forum has got a lot of info on HTC phones and Jasjam is made by HTC.
http://forum.xda-developers.com/showthread.php?t=303872
Hope it helps and sorry I can not be more specific as the issue is hardware related but to pinpoint the fault I need to have the phone on my workbench .