Question about Umax PowerLook 2100XL Flatbed Scanner

1 Answer

Umax Power Look 2100XL

All the scans results with a blue band at the bottom of the scan!!!!!!!!!!

Posted by on

  • anuji Dec 21, 2007


    We have purchased the scanner Umax power look 2100xl (p/n - 960201-11).A scsi card is with the scanner.INITIO is the make of scsi card and the numerics written on the card are pci-9100s,ao1p421,aq58g5.1 . I am facing the problem in installing the Scanner. My pc is of 64bit hardware and xp professional of 64bit is loaded on it .when I install the scsi card its not picking the driver of scsi card. Plz provide the driver of scanner and scsi card that can run on xp pro of 64bit windows.

    Thanks

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Hi, Have you tried these possible solutions; 1.Clean the surface of scanner bed. 2.Uninstalled/reinstall scanner driver/software. 3.Check scanner manufacture web site for driver/firmware updates. 4.checked the underside of the scanner glass for lint, dust that may cause a bad calibration.

Posted on Sep 07, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Umax powerlook - Scanned Image Light Bands


The scan optics are dirty or elements in the scan sensor have gone bad.

Jul 21, 2017 | Umax PowerLook 3000 Pro Flatbed Scanner

1 Answer

I have an UMAX Powerlook 2100XL. My OS is windows 7. I do not have slot for the SCSI. Is there any way to use this scanner with a USB connections


there are some Firewire to SCSI and USB to SCSI adapters that should work- check www.hamrick.com. Ed Hamrick has written Vuescan scanning software that will work with the 2100XL, windows 7 and many of these adpters

Oct 13, 2010 | Umax PowerLook 2100XL Flatbed Scanner

1 Answer

How to do a reduced scan of a large document which doesnt fit into the scanner?


if the document is lager than the scanning screen nothing can be done about it.The best is to get a scanner with a larger screen

PLEASE IF THIS HELPFUL KINDLY SEND ME A VOTE, THANK YOU

Mar 24, 2010 | Umax PowerLook 2100XL Flatbed Scanner

1 Answer

I own a PowerLook 2100XL-USB scanner . I was doing some scans and it was working fine . I got to the 3rd scan and it would not do the scan. It powered up fine and even did the preview image fine of the...


This is a general solution for all IT products. ( I dont have PowerLook2100XL). Uninstall the scanner and disconnect. Start the computer and run scandisk/chkdisk and eliminate any errors in the OS. Restart the computer and load the scanner driver and scanning software. Normally this hsould work. Good Luck
S. Mohan

Oct 17, 2009 | Umax PowerLook 2100XL Flatbed Scanner

1 Answer

When scanning x-rays, sounds like belt is sticking.


As the scanner will still be under warranty this is best directed at Umax support.

Details here

http://www.umax.com/company/contact.jsp

Sep 17, 2009 | Umax PowerLook 2100XL Flatbed Scanner

3 Answers

UMAX 2100XL IS CONNECTED, 2 G LIGHTS FLASHING WITH NO PRINTS


OUR SCANNER IS CONNECTED BUT DOES NOT WORKING. DOES NOT POWER ON THE "SCANNING LAMB" NOW THE TWO GREEN LIGHTS ARE FLASHING ( POWER AND READY ) BUT THE SCANNER DOES NOT WORK OR SCAN.

Dec 09, 2008 | Umax PowerLook 2100XL Flatbed Scanner

1 Answer

UMAX Scanner


I found the drivers on the UMAX site: ftp://67.66.169.205/scanners/magicscan/version4.5/mscan45.exe, http://www.umax.com/download/index.jsp. I just don't know how to connect it... :S

Nov 13, 2008 | Umax PowerLook 2100XL Flatbed Scanner

2 Answers

Dark scans


Hi,

I'm not having that problem, but I'm getting a blue hase the length of the bed on one side. Only solution I know of is to send it back to UMAX support. Which I'm about to do right now. Mine was 5 days out of warranty when it happened!!!

Sep 26, 2007 | Umax PowerLook 2100XL Flatbed Scanner

Not finding what you are looking for?
Umax PowerLook 2100XL Flatbed Scanner Logo

Related Topics:

534 people viewed this question

Ask a Question

Usually answered in minutes!

Top Umax Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

5575 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

274 Answers

Are you an Umax Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...