Car radio channel setup

The dealer will have that.

Check the manual sometimes there written down

When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Holden service centre and get them to enter this code for you.

Choose the required station with up/down arrow buttons, press SELECT.Press and hold PRESET button until number flashes.Quickly scroll through preset channels with arrow buttons.When required preset chosen, press SELECT.
Voila: station saved!
Took me about 15 minutes to figure it out, as bought radio second-hand with no instructions, and none on internet, until now!

ok change the channel to what u want to listen to then hold the number 1 button for like 3 sec or 5 secs then that channel is programed to channel 1 repeat steps for button 2 3 4 5 ect... with ur other fav stations u like to listen to.. then u can press the fm button to go to fm 2 which again u can program 1 through how ever many channel numbers ur radio shows now program different stations other then the ones u just programed on fm 1 choose 5 or 6 other station the fm2 just offers u more stations to program other wise just program the normal 5 or 6 stations to ur radio

Hi,I have a 1999 holden vectra we replaced the battery and radio needs some code! Could anyone help me about this?
Radio No. 92 057 951
Type. Blaupunkt 520
On the sticker big U1E sign
And Some Bar code .BP8393W0791670

Thanks
Endre

hi there
if there is a source button press it till radio display is in screen if you press the source button it will switch from CD - tape - am/FM
to select the channels after this is done press left or right
hope i was able to help

Hi there,

this is simple enough to do, just find the channel you want to save, then press and hold a number u want to save it to!

i.e No. 1 - 96.9Fm

hope this helps

Try the back of your radio