Question about Coleman Campfire Grill

1 Answer

Cleaning product,safely & efficiently

Getting the grim off. what solvents are best , whitout damaging all parts of the camping stove. also, that you don't have to scrub all day....

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers
Re: cleaning product,safely & efficiently

Baking soda and lemon juice or salt and lemon juice with a mild soap!

Posted on Aug 15, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Stove parts

Have you tried this website for Brinkman stove parts.
All Brinkmann Models

Not sure about the model number of your stove.
For example the regulator for
  • 842-A250-0
is available from,-Valves,-and-Regulators
You can select using your model number and check.

Aug 13, 2014 | Grills & Smokers

1 Answer

Where can I download a user manual for the Model OSD-60L stove and we lost the wind shield that goes around the stove as well...where can I get a replacement? thanks

Unfortunately, there's no online manual for any of the Camp Chef products. However, you can call them directly 1-800-650-2433, and they can email you one as an attachment. Plus, you can also purchase a wind shield from them at the same time. They,re good folks to work with and they look after their consumers

Hope this was of help to you..

Jul 13, 2011 | Camp Chef EX-60LW (LP) Grill

1 Answer

I have miss-placed the legs to the Camp Chef Explorer series EX-60LW 2-Burner cooking system. Do you sell those independent of the stove? Regards, Lally

Sorry, Lally, we don't sell any parts on this website. Only information on how to repair or find parts. But, you can find the replacement legs you're looking for at Camp Chef. Phone 800-650-2433 and ask for the Parts Dept.

Mar 29, 2011 | Camp Chef EX-60LW Propane Grill

2 Answers

Clogged regulator?

Disconnect the disposable bottle and make sure the stove's gas adapter is not clogged with insect debris or something. Also make sure your bottle is not empty by trying another one just in case! Douglas

Jul 10, 2010 | Coleman Grill

1 Answer

Gas stove burner problems

Just though of something after digging through a number of manuals on various sites--with our stove, we have to open the propane valve, let it sit for a bit--to let the pressure build I guess, before trying to light it. If we don't the burner never comes fully on. Still drives my wife nuts.

Oct 27, 2008 | CADAC Grills & Smokers

2 Answers

Coleman propane stove problem

The connector for attaching the regulator to a disposable propane cylinder has a sintered bronze filter in the tip of the brass probe tube that is prone to clogging, or the bronze pellets get mashed down over time, restricting gas flow, and this will cause a portable grill or camp stove to perform poorly. The filter is so fine that it takes very good eyesight and bright light to see that it isn't solid metal, or use of a strong magnifying lens. The best solution is to buy a new Coleman regulator assembly. If you are unable to get a new regulator assembly and have the skills and the tools, you can try drilling a very small hole on the side of the probe tube with a #60 drill bit, just below the bronze filter, but near enough the end of the tube so that the hole will be past the plastic seal when the disposable cylinder is fully screwed into place. You should avoid drilling directly into the end of the probe tube, as the end of it is used to depress the Schrader valve in the disposable cylinder to allow gas to flow. A #60 wire gauge drill bit is only 0.040 inch (1.016 mm) in diameter, but makes a hole large enough to supply sufficient gas to a portable grill or a dual-burner camp stove. If you choose to perform this work, the probe should be unscrewed from the regulator body and the Schrader valve core in the probe tube should be removed before drilling. Be sure to clean all brass and bronze particles out of the probe tube before re-installing the Schrader valve core and the screwing the probe into the regulator. Use a removable-grade thread locking compound to secure the probe in the regulator body and don't over-tighten it, so as not to crush the rubber gasket. Allow the thread locking compound to cure for several hours before attempting to use the regulator. Keep in mind that this modification increases the likelihood of dirt getting into the needle valves and jets of your stove or grill, which can cause maintenance problems in the future.1_28_2013_4_49_27_pm.jpg

Aug 19, 2008 | Coleman Gas Grill Stove

Not finding what you are looking for?

Open Questions:

See all Coleman Campfire Grill Questions

Coleman Campfire Grill Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coleman Grills & Smokers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers


Level 3 Expert

494 Answers


Level 3 Expert

1751 Answers

Are you a Coleman Grill and Smoker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides