Copier flashing between L and 1.

i also have the same problem, i have also changed the screen i have two and both flash ten times?

download the code from www.remotecodelist.com
and download the instr. manual from www.retrevo.com

God bless you

My 2005 SLK350, did the same thing. The command system locked up, stuck on Mercedes logo, 3 different times. All I have to do, is disconnect the negative cable for a few seconds. Everything returns to normal instantly. Try it, I bet it works for you also.

Try a hard reset, if not go directly with manufacturer and upload soft version, that always fix its, also try hard reset by Hardware Keys but unless you have flashed it, it dosent come it android. take care

this happen when executing SIM 49 - 1 . the copier become in flash written mode to solve this problem turn off the copier press and hold down zoom key and zero key and turn on the copier .
If it didn't work you have complete downloading flash room

Our old Toshiba 3560 copier starts up for about 1 or 2 seconds when turned on, but then the screen flashes blank, and I hear 4 beeps, and that's it. I can't figure out what to do with it, as there are no error messages. Anyone?
I just had the same thing happen to me. Is there a fix for this?

Hi. I´m also from Portugal and can solve situation. Please send me mail to [email protected] Cumprimentos

The flashing Apple is the equivalent of Microsofts blue screen of death. This apple symbol means hardware failure. Not good. Do a Google search for flashing apple of death. Here's a video that should help you fix it yourself. Hope this helped.

http://cnettv.cnet.com/2001-1_53-25928.html

Try pushing the button on the headset 1 time to see what happens. We are using Motorola Razors and it works very well after you push the button once but have your phone open to see what you activate after pushing the button.