Question about Nokia 1600 Cellular Phone

3 Answers

Blinking nokia in 1600 and no flashing possible

I have a nokia 1600 phone of which the LCD gone blank and only the lights are blinking. when I tried to flash it with UFS4 it shows "First Boot Error : Bad Resp DCTx" and the flashing could not be completed.

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

U r problem is related with flash ic , if ur software usf 4 showing firdt boot error send me all informatio on email id cause it is not only software problem but also hardware problem if u send me all info in ur ufs 4 window i can tell u what u need to do

Posted on Aug 13, 2007


Nokia 1600 auto power on off

Posted on Feb 06, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

If not moulding reballing cpu will be solve

Posted on Aug 28, 2007

1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1600 nokia phone insert sim problem

At the bottom of the phone you have the headset, charging and easy flash (USB) connectors. If the easy flash (USB) connector is soiled, oxidized, dirty or the terminals are shorted; it can cause the sim card issue. The unit starts and takes long to display then "insert sim card" appears.
To resolve the issue:
  1. Clean the easy flash connector with a lacquer thinner or even a 70% ethyl alcohol.
  2. Make sure dirt is removed between the terminals.
  3. If you can disassemble the unit, clean the connectors terminals from inside.
  4. Clean also the board.
To disassemble the unit:
  1. Remove A and B-covers.
  2. Remove the six T6 screws.
  3. Pry the board including the LCD frame and light guide assembly from the sides to remove it from the D-cover.
  4. Reassemble in reverse order.

Nov 03, 2009 | Nokia 1600 Cellular Phone

1 Answer

The keyboard and screen light don't work

nokia 1600 display blank thi is my broblem

Feb 14, 2009 | Nokia 1600 Cellular Phone

1 Answer

Blinking problem in my NOKIA LCD

Its a Hardware problem ... Visit to Nokia Care Center as soon as possible.....

Dec 13, 2008 | Nokia 1600 Cellular Phone

3 Answers

NOKIA 1600 IMEI ???????????????

yes sir' JAF can solve that prob.
by using RPL logs...

Jan 09, 2008 | Nokia 1600 Cellular Phone

4 Answers

Nokia 1600 problem

try the below given jumper settings,it is applicable only if the board print is available


Dec 03, 2007 | Nokia 1600 Cellular Phone

5 Answers

Nokia 1600 repair

see budy that might be a welcome note message if ur phone works after that, menu>>> settings>>>>phone settings there is an option called welcome note delete the welcome note and than try.

Oct 20, 2007 | Nokia 1600 Cellular Phone

1 Answer

Screen blinking

flash u r phone with software before flashing change display socket witch is on board u rproblem will solve send me u r rply on

Aug 12, 2007 | Nokia 1600 Cellular Phone

Not finding what you are looking for?
Nokia 1600 Cellular Phone Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

jonathan mariano
jonathan mariano

Level 2 Expert

344 Answers


Level 2 Expert

295 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides