Picture in picture / or picture problems

Hi,

Additional information is necessary to suggest a solution. For exemple, your screen is black or grainy when you select a channel. Please let us know to try helping you.
Thanks,
Sully

is it on freeze ?

If this TV is connected to cable TV and you are using a cable box then the cable system is at fault. If you are connected to cable TV with no cable box then look at the pictures on other TV's in your home if you have another TV. If they look fine and are small enough to move around. Move the TV and connect it to the cable outlet where this TV is connected and then examine those channels again. If they are grainy then a call to the cable company is due. They can use a signal checker to see what the signal levels are at that outlet for any given channel range.

Try to see if you have 5volts for your EEPROM. If the voltage is normal try to replace your EEPROM or try to reprogram it. Your EEPROM is corrupted so that's why it will not store data.

Normally grainy pictures are a result of poor ground connections, although usually for more than one channel. Check the cable connections first. Otherwise all I can suggest is to have the tuner replaced.

Dan

tv wont turn on when i hit power it makes the clicking noise like it is going to turn on, but never does and the red timer light next to the power button just flashes.
help!
trinitron kv29f1u
only clicks and blinks

Remove power from your cable set while watching DVD and see if the problem magically goes away. If that's the case, the cable box is to blame...accordianman

sounds like it needs to be switched to cable mode. go in to your menu look for something like STD Cable.

the tacticle (micro switches)on the front of the main chassis have most likely gotten wet at some time,I suggest replacing them all.

My friend, you need to hook up a signal source such as an antenna or cable . The channels wont come in and it will all depend on where you live and how close to a major city on what and how good you will get the stattions. then once an antennena is connected, do the auto programming again. Good Luck