Question about JVC (VDR14EU5) Mini DVD-R Storage Media (5 Pack)

1 Answer

DVD recorder We bought the above less than 2 years ago and I am becoming disillusioned with it. Several times I've set the timer to record a programme I really want to see and it has failed to record. On some occasions it has recorded the visual but without sound. This is not for any reason offered in the manual. Last night was the last straw. The DVD I used was empty but, having recorded about 5 minutes of what came before the programme it seems to have switched itself off. I am really annoyed. Can anyone offer a suggestion as to why this happens and how I can overcome it please?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 51 Answers

Sounds like a hardware issue. Given that the device is 2 years old, I would suggest buying a new one. Dvd recorders are not too expensive these days and you might save yourself a lot of headache by doing that. You might also try TIVO or some other form of dvr service, or set your computer up as a dvr if you know how.

Posted on Aug 17, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG HDD RECORDING WONT STOP


Did you try to contact LG support?

Nov 19, 2015 | LG RH1999H DVD Recorder/HDD Recorder

1 Answer

Is third time a charm. Again several years ago I


Here is the owner's manual for your DVD machine. This is a VHS recorder but not a DVD recorder. To record VHS tapes to DVDs, you will need a DVD recorder.
You will plug the yellow video out connector on the VHS to the yellow 'Video in' connector on the DVD Recorder. Do the same for the red and white audio connections, out on the VHS, IN on the DVD Recorder. Connect your TV to the DVD recorder so you can see the picture you are recording.

Mar 31, 2010 | Televison & Video

1 Answer

Samsung DVD-SH897M - Cannot get Time Programming to work


You need to contact Curry's direct, I am certain they will be able to send someone to explain it to you.

Jan 05, 2010 | Televison & Video

2 Answers

Stop Substitles on a LG RHT497H 160G dvd recorder?


I have the LG DVD recorder DRT389H which has the same problem. You can't switch off the subtitles during timer recording from the Electronic Programme Guide. The only way I could stop this was to go to the main set-up menu then select the A icon. Select DTV Subtitle and choose a language that the TV programme isn't broadcast in. I chose Gaelic. The only disadvantage is that this stops any subtitles being recorded so you can't access them later.

Dec 26, 2009 | LG RH177 DVD Recorder/HDD Recorder

2 Answers

Disc initialization Toshiba D-R250SB recorder


can i suggest you record vhs tapes on maxell dvd-r or tdk dvd-r (if you wish to keep them) used the dvd-rw to record those sporting events / movies or specials that you might not be around for....(because any one can accidently erase an dvd-rw).......now that formatting dvd-rw issue. i found that dynex http://www.dynexproducts.com/c-11-storage-media.aspx dvdv-rw works best with toshiba . i record all the ultimate fights erase (format) after i look at and on to next good luck

May 28, 2009 | Toshiba DRW2 DVD Recorder

1 Answer

Timed Recording - Won't record VHS or DVD


Bought a new Sony DVD recorder/player with VHS.

Dec 29, 2008 | Insignia IS-DVD1001 DVD Recorder/VCR

1 Answer

Toshiba DVD recorder timer recording does not start


Does the unit not require to be in "Standby" for recording to commence.

Nov 30, 2008 | Toshiba DRW2 DVD Recorder

2 Answers

Set the clock on my Panasonic NV-J11 HQ VCR


Hey there - I've got the exact same model VCR; although I've lost the manual as well, I've been using it for so long that I

can usually remember it all from heart:

To set the clock

1. Open the flip-down lid, push [CLOCK] button.
For each of the steps below, use the white-labeled [+] and [-] tracking buttons to increase/decrease each number.
2. Two digits should be blinking - this is the year (last two digits only) - adjust and push [NEXT] when done.
3. Two digits, with a "D" next to them should now be flashing - this is the month (1=January thru 12=December), adjust and push [NEXT] when done.
4. Two digits, with a "M" next to them should now be flashing - this is the day-of-month (1..31), adjust and push [NEXT] when done.
5. The time should now be displayed, with hours flashing - adjust and push [NEXT] when done.
6. The minutes of the time should now be flashing - adjust. When you push [NEXT], this will complete the date-setting and start the seconds-of-the-minute off at zero - handy for synchronising to an external time source (I recommend using the

Teletext broadcast clock if available - you'll usually find your recordings will start right-on time when you do this, depending on your TV station).
7. If you make an error at any step above, push [CLOCK] to exit clock-setting mode and start again.

Depending on your model of VCR - the clock may either persist through power failures (backup battery) or may have to be reset next time power is lost. Mine doesn't seem to have a backup battery.

To program the VCR for timer-recording: There are two modes, Timer Record (start and finish recording at arbitrary times in the future), and OTR ("One Touch Recording", start recording right now and finish at a set time in the future).

*** Timer recording ***
There are eight programme slots (numbered 1-8 on the display), each programme slot has an individual channel and start/finish time associated with it. Programmes can be scheduled up to 1 month in the future.

Push [PROG/CHECK] to cycle through each slot (after the eighth slot, it will return back to normal operating mode).

When you want to set a programme, push [PROG/CHECK] until you find an empty slot (date/time will be all dashes). Then do the following:

1. Channel should be flashing - set this using white-labeled [+]/[-] tracking buttons and push [NEXT] when done.
2. Date should be flashing (defaults to today), use [+]/[-] to adjust starting date and push [NEXT] when done.
3. Set the starting time ("ON" should be lit next to time) (defaults to now), use [+]/[-] to adjust starting time and push [NEXT] when done.
4. Set the finishing time ("OFF" should be lit next to time) (defaults to starting time), use [+]/[-] to adjust and push [NEXT] to complete the setting of this programme. After this, you'll be returned to the start of setting the next programme (the unit will also beep five times to confirm you have a valid programme set).

If you make an error (or you need to clear a programme slot that already has a programme set), hold down the [-] and [+] buttons for three seconds until the starting time/date becomes all dashes.

When you're done with setting your programme(s), keep pressing [PROG/CHECK] until you exit into normal operating mode, then push the [TIMER REC] button to activate the timer; this will put the VCR into timer standby mode, and the orange clock icon should be lit solidly on the display. There should also be a number (1..8) lit for each programme that has been set, but is still yet to run. Make sure you have the tape inserted and positioned in the right place when you do this.

After timer standby mode is activated, you can then push [PROG/CHECK] to review the individual programme slots; each push of [PROG/CHECK] will cycle through each slot (the display will time out in 10-15 secs).

To get out of timer standby mode (either when after the programmes have run or if you've made an error), push [TIMER REC] again - this will return you to normal operating mode (where you can fix errors if need be). Programmes that have run to completion should be automatically be cleared.


*** OTR (One Touch Recording) ***

This will start the tape recording immediately (good for when you have an unexpected distraction or sudden change of plans) and have it stop at a later preset time. The OTR mode only has one programme slot, unlike timer record.

1. Insert tape, have it positioned where you want to record from. Set the channel to the one you want to record from.
2. Open the flip-down lid, look at the bottom-right corner of the array of buttons inside.
3. Push the green-labeled [OTR +] button; this will start the tape recording instantly (the red "OTR" indicator should be lit on the display).
4. The stop time should also be displayed - use the [OTR -] and [OTR +] to adjust the stop time. When you're done, that's all you need to do (you can adjust it any time later).

To abort OTR mode (ie. if you start it by mistake, or want to stop the recording early), push the main [VTR] button to stop the recording. Yes, that's right - turn the whole thing off, it'll leave you in standby mode.



Hope this helps!


-- Bryan R.

Nov 26, 2008 | Panasonic PV-7451 VHS VCR

2 Answers

Programmed recording to the hard drive


Either You haven't set the time/timer correctly or you need to find a way to clear/format the hard disk.

Aug 16, 2007 | Samsung DVD-HR735 DVD Recorder/HDD...

1 Answer

DVD Timer not working


It usually means that if it doesn't record you don't have a blank DVD in the slot. Hope this helps =)

Nov 06, 2006 | Panasonic DMR-E95HS DVD Recorder

Not finding what you are looking for?
JVC (VDR14EU5) Mini DVD-R Storage Media (5 Pack) Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Electronics - Others Experts

Marvin
Marvin

Level 3 Expert

83557 Answers

Brad Brown

Level 3 Expert

17617 Answers

Tom Chichester

Level 3 Expert

48596 Answers

Are you a JVC Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...