Deck installed fine and tuner audio is working My Ipod has the latest software version that Alpine says will work however the functions display but there is no audio.
Cd playback does not work - unit vibrates
Thanks for any help provided
Comments:
Aug 13, 2007
- Hi,
Thanks for your trying to help me out , however I am having the same ptoblems with the unit after the change you recommended.
If you know of anything else I could try please let me know
Disconnect whatever is attached to the BLUE wire at the back of the Alpine deck. Re-connect it to the BLUE/WHITE wire instead. This should solve your problem.
I have an Alpine chs 5624 CD changer that shows ERROR 01 on the head when I select the CD Changer as...
(More)
I have an Alpine chs 5624 CD changer that shows ERROR 01 on the head when I select the CD Changer as the source
This started a while back, but was only doing it every now and then. I used to solve it by...
(More)
This started a while back, but was only doing it every now and then. I used to solve it by unplugging the ipod, restarting the ipod by holding the menu and centre button until it restarts and plugging it in again. This used to work for about a day or two, but it started getting a cracking noise which i assumed was a dodgy wire on the speakers. It now plays about 15 seconds of song and disconnects.