Question about Indesit W 123 Front Load Washer

1 Answer

Indesit washer/dryer widl 126s

I have a rapid flashing on-off/door lock led plus delay timer led , i have tried to reset the fault but still there. Does any one know what this fault code relates to ? many thanks

Posted by on

  • 1 more comment 
  • glyn marfleet Aug 12, 2007

    have tried this but the fault is still there, do you know what part of the machine this fault code is for ?

  • glyn marfleet Aug 12, 2007

    Thanks , would like to try and fix myself !

  • Anonymous Mar 26, 2014

    both red leds flashing plus delay start what does this mean

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Hi gmarf....to reset your machine to cancel those symptoms, Unplug your machine from the Wall Outlet for a minimum of 1 minute. Upon restoring power, it should be reset and ready-to-go.....If you have any further questions or issues please update your post....good luck my friend

Posted on Aug 12, 2007

  • V. Chris Suehiro
    V. Chris Suehiro Aug 12, 2007

    Hi gmarf...I will try to track that down, however, the manual instructs that when reset is used to cancel lock plus one other led and it does not work, call for service....I'll update if/when I find what the fault is addressing

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What fault code on a Hotpoint BWM129 does Door Lock LED rapidly flashing along with Delay Start LED flashing intermittently represent?


replace the motors brushes check the filters
and clear any bits of bra wire etc

then reset the machine {usually hold power in and apply the mains}

May 25, 2014 | Hotpoint Washing Machines

1 Answer

The On-Off door lock LED flashes rapidly at the same time with Delay, Timer and Rapid LED. and it wont start.


Many times faults like this can be cured by Uplugging the washer from the mains power supply and leaving for 10mins. Also check all filters, drain and supply lines are clear and not kinked.

May 04, 2011 | Ariston Technologies AW129NA 16 Lbs Front...

1 Answer

WIDL 126s Wahing machine fault


could be mains filter . unplug from wall and remove top look at where the cable goes into machine are any of theses wire's burned . keep a note of were they go .

Feb 12, 2010 | Indesit W 123 Front Load Washer

1 Answer

Lights flashing on indesit WIL123S


Hi, sounds like you need to change the door interlock located where the door catch pushes into.
Take the top off and undo the two screws with a tork screwdriver
and replace.
(Remember to turn off the supply and pull out the plug top)

May 09, 2009 | Indesit W 123 Front Load Washer

1 Answer

Indesit WIDL 106 wont start -ON/OFF-Door Led Flashes rapidly


It is a defectiv controller pcb. I think the eeprom on the controller pcb lost its program (happens often on Indesit machines).

The only solution I know is to change the controller pcb, - not a cheap solution.
I have the same problem with WIDL 106.

Dec 01, 2008 | Indesit W 123 Front Load Washer

1 Answer

Indesit widl 126 uk


Turn the control knob to a black dot leave the door open and press the on off button in and out quickly and look for a change in the lilght,, it should blink 3 times rapidly once it does ,, then the machine is reset and ready to use,,,

if you have any problems let me know im here for another hour..

Jan 25, 2008 | Indesit WA 115 Front Load Washer

4 Answers

Indesit Standard WIL 123 (UK) Washing Machine


Had a similar problem ,flashing red led means door not locked, I removed door from machine removed front from door and found hinge pin for lock had come adrift, religned pin and chapped back into position .THen replaced door and door to machine .dor shut and lock worked perfectly, hope this helps

Jan 04, 2008 | Indesit W 123 Front Load Washer

4 Answers

Flashing lights indesit wil103


you will need to unplug the machine at the mains, give it two minutes and the auto door lock will release your duvet, however start saving the pennies as your pcb is knackered and you'll be looking at about £200 to fix it

Oct 25, 2007 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Indesit W 123 Front Load Washer Logo

1,264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...