Arista rb34lc2 I am after an operating manual for an an ARISTA RB34L-C2 set top box. thanks

Check with your Bernina dealer. I believe you can have them update the software on your machine.

Doesn't appear to be a 3-digit code, unless my 55-page catalog doesn't list it.
Might be 4-digit?
Try Googling the web with phrase such as "remote code for arista model #####"

Arista Usually Has PDF Copy On Website (download and save in documents)--If Model Is Not Listed Use Manual Code Search Procedure. NOTE: Universal Remotes Will Not Always Enable All Functions. If This Happens OEM Remotes Are Available On eBay By TV Name And Model Number. ie: neoniq ******** remote

try this link for help getting a manual BERNINA of America

Make sure the tv is set in antenna mode and not cable mode.

I see you posted this a while ago, I have the same problem, my kids hit the factory reset button... Have you found a solution since?? if so, could you let me know?

Thanks,
Steven.

My problem was really a solution. I was just trying to warn others using Arista boards to not filter their Foxtel signals through their boards. I solved my problem by bypassing the Arista board, Foxtel Australia tell me that their IQ+ boxes have surge protection built in. I guess when you get a surge, the Foxtel box burns out and you have to get Foxtel to come out and replace it.
Cheers

Here's the URL to the manual:
http://www.aristagroup.com/catalog/av/images/large/58-7755instr.pdf

Ya all you really need is a "film retriever." We use the Arista Deluxe one in class and it is extremely user friendly (this one, http://www.freestylephoto.biz/32760-Arista-Deluxe-Film-Retriever?cat_id=1603), however you can probably find it cheaper on ebay or craig's list, but ya that's all you need to pull it out, however, be careful when using it because if you wind it up too tight then you may just have to develop the roll, but um ya that's my solution.

Are you talking about a communications program on your computer that talks to your Arista? Your question is unclear so I'm not sure what problem you're describing here. However, if you're saying you have a problem with a program you installed on your computer to communicate with Arista... then Un-install the program from your computer. Use the "Uninstall" option, OR go to "Control Panel > Add/Remove Programs" and uninstall the Arista program from there. Then REBOOT your computer and re-install the Arista program. Removing and reinstalling programs like this almost always makes them work properly again.