Washing Machines Logo

Related Topics:

Posted on Mar 17, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Water leaks during drain cycle and the machine

I have a hoover 800f front load washing machine.Water leaks during drain cycle and the machine stops.

  • hofteal Apr 11, 2009

    There is a leak behind the wash machine drain and water is coming out into the next bedroom closet.

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 8,619 Answers
  • Posted on Mar 17, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Dec 27, 2008
Answers
8619
Questions
4
Helped
2149197
Points
26471

Hi

If the water leaks during drain and spin only: A washer that leaks only during the drain/spin cycle often has a leak in the main drain hose. Inspect the entire hose and correct any problem you find. Alternatively, the steel or plastic outer tubs can rust, split, or be punctured. This may be most visible during large loads and high water levels. If this happens, you may have to replace the entire outer tub--but that may not be an economical repair to make. Consult a qualified appliance repair technician for further details.


Please do rate this solution as "FixYa" if found useful.

Thanks
Rylee

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What code does LE stand for on Samsung front load washer

LE LE1 E9 11E Natural drain/Water leak - Low water level detected during cycle. · Check that the level of the drain hose is not lower than the base of the washing machine. Additionally check for a water leak. If no trace of water, switch off the power, reconnect and try again. · If problem persists please call the customer support team.
0helpful
1answer

LG WM2140C front load washer overflows during drain cycle

This sound like the water is leaking from the drain pump.
1helpful
1answer

Hoover hpe 236. water not draining, stops mid cycle, lights flash

Have you checked the pump filter, and or that the pump is actually working. if it spins o/k with no water in, then I would suspect a draining problem.
If filter clean and pump o/k, then it could be a control module fault. if this were the case, then it would probably be wiser to purchase a new washer.
Hope this is of some help to you.
0helpful
1answer

During a wash cycle water purs out of the filter

check to make sure that one the drain is not clogged second it my be the water pump going out that pumps the water out to the drain
0helpful
1answer

WATER IS COMING OUT FROM THE BOTTOM OF THE WASHING MACHINE ONCE THE WASHING HAS STOPPED, IT DOES NOT LEAK DURING CYCLE AND IT SPINS AND DRAINS FINE..

i would inspect both the hoses on the pump
no leak during cycle is explained because water is moving through them to fast to leak when the machine settles it starts to leak
0helpful
2answers

Maytage MAH6500AWW Overloaded washer now leaks when filling

since you can drain it
take off the back and watch what happens when u turn it on
i believe you make have a loose drain connection
2helpful
1answer

Machine not draining

Can you hear the pump running just before the spin cycle, if so then I suspect a blockage in the filter or pump hose, If not and machine is quiet then it could be a faulty water pump or PCB board and you would have to call a technician.
1helpful
1answer

Our hoover ultra care 1300 large load washing machine spin fault

The most common cause of machines stopping mid cycle is not draining. Your machine should have a filter behind the kick plate at the bottom.
If this is not the case please post back for further assistance.
0helpful
1answer

Leak problem

Ours did same thing after nearly same amount of time.

Run a couple of sanitary cycles without any cloths.

Only use HE detergent. 

Problem stopped after this
0helpful
1answer

Draining & Spinning

I had a problem and when they took the back off. Underwire bra had got jammed through drum holes which stopped it spinning and water issues. I hope this might help.
Not finding what you are looking for?

426 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29492 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...