Question about Canon PowerShot SD1300 IS IXUS 105 Digital Camera
The camera is blocked, does not shut down automtically any more, how to restart it ?
Posted by Anonymous on
Here's a video covering troubleshooting steps for this problem.
and here's a page summarizing the above steps.
Posted on May 11, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Lens error, restart camera
Lens error is usually caused by mechanical faults concerning lens assembly. The lens cannot extend or retract fully, the error is detected and lens error is returned.
Sometimes this can be fixed playing with the lens during extraction or retraction to help the lens asset getting back to normal.
More often the camera lens must be disassembled and re-assembled by a technician to fix the problem.
Posted on Jul 05, 2009
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.
Use these at own risk as it may further damage the camera.
Firstly , try connecting your ac adapter or usb cable.
Try holding the shutter button while switching on the camera.
Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).
Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.
Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.
Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.
Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.
If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.
Posted on Nov 10, 2010
Tips for a great answer:
Aug 27, 2015 | Canon PowerShot A4000 IS Silver 16MP...
Nov 14, 2011 | Canon PowerShot SD1300 IS IXUS 105...
Sep 12, 2011 | Canon PowerShot SX30 IS Digital Camera
Aug 03, 2011 | Canon PowerShot SD1300 IS IXUS 105...
Jul 30, 2011 | Canon PowerShot SX210 IS Digital Camera
Jun 07, 2011 | Canon PowerShot SD1400 IS IXUS 130...
May 02, 2011 | Canon PowerShot SD1300 IS IXUS 105...
Mar 27, 2011 | Canon PowerShot SD1300 IS IXUS 105...
Jan 06, 2009 | Canon PowerShot A590 IS Digital Camera
204 people viewed this question
Usually answered in minutes!