Question about Polaroid TDA-03211C 32 in. LCD HDTV

1 Answer

Power board TC18813F- parts list needed

Need to know specs of capacitor in slot HS2 on power board TC18813F.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Polaroid Master
  • 74,383 Answers

If you wish to get more details, surf the following link. There are over two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. You can get a solution there. Type in the brand name to your device to its search box, can be located at the top right of the display window.

Posted on May 11, 2013

  • jlhx2 May 11, 2013

    Thank you for the site. It may be very useful later, but there was no listing for my tv or power board.



2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Polaroid TLX-03210b with power supply TC18813F no

I believe it is r16 which is a 10 ohm surface mount resistor. It is the closest thing in parallel to r55 (.47 ohm @ 2w)

Posted on Jan 12, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Panasonic viera capacitor

look closely on the board and the part. you will see a part number.

Feb 25, 2013 | Panasonic TC-32LX70 Television

3 Answers

Sceptre x9g naga v

May i know the exact detailed model/maker of your unit...?

Jun 13, 2008 | Computers & Internet

3 Answers

What are the basic parts of the intel motherboard?

cpu, video card.hard drive, floppy drive cpu fan, power supply, is the battery good first for cmos, are all the connection right. is the power supply the mem.right in the slots is it ddr or ddr2 do you have the right speed on cpu for board as well as mem , what is the intel board numbers on it d915 or what i need to know which board to find out anymore ok jim

Jul 04, 2011 | Intel Motherboard

1 Answer

The tv some tims will not turn on and you have to play with it to make it turn on

Sounds like a definite power supply issue, once the capacitors on the power board go bad, you will sometimes be able to turn it on still, but eventually it will die completely. If you open the TV, there is likely a bulging capacitor on the power supply. Even if not a obvious capacitor problem, the Power board is likely the culprit.

Can buy new one on many websites including, or used on ebay.
shopjimmy will give you a list of the compatible parts as well as all the different tvs the board you need can be found in, to give you more options on where to find the part you need.
make sure you buy based on the part # listed on the board, and not by the model number of your TV, as there are usually many sub-models that all have different interior parts, and most are not compatible with each other.

Jun 07, 2011 | Soyo Televison & Video

1 Answer

I have a Panasonic Plazma TV, TH-46pz80u is the Model Number and the LED light blinks 8 times. I just need to know which certain board to replace. I have already opened the back of the tv to inspect...


The power supply board is dead, do you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like, to buy a whole refurbish power supply board for the replacement.

This will help in solving the problem...

May 15, 2011 | Panasonic Viera TH-42PZ80U Plasma TV

1 Answer

I would like to know what are the replacement parts for a video card and sound card for my Gateway GM5480E, or suitable parts.

You have a PCI Express slot on this computer (the black slot that run horizontally on the bottom half of the board. It is compatible with PCIE spec 1.0, so whatever video card you get MUST be 1.0 spec. The 2.0 spec won't work. You did not provide the information on your power supply, but this is another important consideration. Many video cards require a certain wattage output, and many will also specify a minimum output on the 12V rail. The more powerful the video card, the more likely this will be a problem. If you are a gamer, get the best card you can for the price, and make sure to check about power and the PCIE specs for the prospective card. If you are not a gamer, look for a slightly cheaper card, as you really don't need all that power.
As for sound cards, your PC has 2 PCI cards, which you can slot in any PCI sound card. I prefer the soundblaster line of cards or Xfi from creative labs. Depending on your Operating system and how much you want to spend, I can provide a better recommendation. Feel free to post more information on your PC if you want a more specific recommendation.

Mar 15, 2011 | Computers & Internet

2 Answers

Hi I have a Westinhouse LTV-32w6 HD that doesn't turn on checked fuse at power board and it's fine any ideas ?

LCD tvs have power supply board problems very common are parts call capacitors are alway have leakages it bulges up on it tops or puffing up on it tops.These capacitors parts are dying about to be dead.That why,ur tv is not getting power,power light flashes,delay power on to tv like 2 to 5 mins or more.U know basic electronic and can do soldering?Check the power supply board for those dying about to be dead capacitors,that bulges up it tops or puffing up on it tops.Replaced these dying to dead capacitors,will fix ur tv power supply board problems.Or tries websites like, to buy a whole refurbish power supply board for the replament.

Sep 18, 2010 | Westinghouse LTV32W6HD 32 in. LCD...

1 Answer

My union color television is dead only power red light is on.

Swollen, Bulged, Bad Capacitor The main cause of this power up problem are bad capacitors on your power if the capacitor is bad
What you need for the opening of the television is Screw driver, Soldering iron(40watts+), Desoldering braid, Soldering wire, and capacitors.
Now lets talk about the specs, capacitors hold 3 important value:
1. The capacitance measured in uF(micro farads) (ex. 2200uF), 2. Voltage (ex. 10v), 3. Temperature (ex. 105°C)
Important Notes:
Flat panel Television power supply capacitors has 10v installed on the board and it is attached to a 12v bus which is causing to bulged.

Look at the bad capacitor and get the right information from it, remember uF, voltage and temperature. Mine, I only change 2 capacitors. It needed two 2200 uF, when I first saw my power supply it was really easy to spot the bad caps. Some Samsung LCD owners did went ahead replace all the capacitors on the power supply to make sure. Now if you’re like me, an inexperience solder, I would not recommend changing all the capacitors because to me it was time consuming for a noob(newbie) like me ^_^.

Few things to take note, always make sure you have the right polarity. Negative part is where the colored stripe on the capacitor.
But if otherwise, the power supply board is bad, you can try websites, to buy a refurbish power supply board for the replacement.
Hope this helpout...

Aug 08, 2010 | Televison & Video

1 Answer

Plasma model ciwp4206 made by funai (inside samsung plasma)doesnt turn on, light blinks 9 times then nothing. thanks in advance

Remove diodes D2500 and D2501 (which are only protection, making the TV goes to standby instead of powering on) from the main power supply board. If the light does turn to a green one instead of going back to standby and you have the sound but no image, it should be the same problem as I had, which seems to be frequent with these Funai piece of junk.

You need to replace the ceramic capacitor C2258 on the main power supply board, it should be the faulty part as it was on mine. This capacitor is near an aluminium heatsink and was slightly burnt.

Here are the specs of that part from the service manual:

As I didn't find a capacitor with these specs, I put two capacitors in parallel and it works fine now. Good luck!

Jul 12, 2008 | Televison & Video

3 Answers

Bad power board Planar PL2010M

There is a supplier of power boards online, you can google them with numbers from the board but I don't suggest using them. Look for information on the company also. I've seen a lot of complaints for this "international" company.

The fix for most of the problems on these monitors is about $8 on new capacitors (Plus shipping).

First check that you are getting a strong 12V from the external power adapter. If so, the problems may be as simple as changing out a few capacitors.

On the PL2010M monitors you need the following parts. I've added digikey part numbers to make life easier:

P10271-ND 220UF 25V Capacitor (3 or 4 depending on PS)
P10275-ND 470UF 25V Capacitor (1)
P10221-ND 470UF 10V Capacitor (4)

If you're not comfortable with soldering and de-soldering electronics, take it to a local technitian for the work and give them the parts list above. That should work to fix your issues. I've fixed several of these monitors so far. All the problems were related to the power supplies having bad capacitors. Same with the Planar PL1700 LCD monitors.

Good luck!


Nov 25, 2007 | Planar PL2010M 20" Flat Panel LCD Monitor

Not finding what you are looking for?
Polaroid TDA-03211C 32 in. LCD HDTV Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides