Question about Jacuzzi BN00-959 Opalia Whirlpool Bath 6'- White
Bath is approximately 9/10 years old. Opalia with 6 jets. I can't remember the exact model
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: jacuzzi bath
Many time leaks around pumps are a simple o-ring that needs to be cleaned and/or tightened. If the jets are leaking from the back side then the jet will have to be removed and resealed.
Good Luck, Phil
Posted on Dec 11, 2008
The soapy water will fill all of the jets, tubes and the pump assembly. Will it hurt the tub if the jets are not running? The soap film will build up in the jets, tubes and pump assembly and can possibly cause damage if the tub is run at a later date. Contact the tub manufacture and see if there is a safe bubble bath you can use.
Posted on Aug 28, 2009
Open pannel and look for a reset button on or near the pump motor.. Or it is posible that the pump motor is shot..
Have a great day !
Posted on Nov 11, 2009
SOURCE: Our jacuzzi tub is 20
if you have a water stain on the ceiling below your tub then you have a water leak. There is no easy solution for this. You must get to the underside of the tub in order to watch the jets when the tub is full of water to isolate the leak and then have it repaired by a plumber.
Posted on Aug 18, 2011
Tips for a great answer:
Jan 10, 2016 | Home
Jul 08, 2012 | Home
Aug 15, 2011 | Jacuzzi Home
Mar 17, 2011 | Jacuzzi Home
Nov 11, 2009 | Jacuzzi - Bathtub - Alcove - Navona -...
Aug 23, 2009 | Jacuzzi - Bathtub - Alcove - Navona -...
Jul 28, 2009 | Home
Mar 03, 2009 | Whirlpool Jacuzzi Jacuzzi Bath Fuzion EF50...
253 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: