Question about Netopia Computers & Internet

1 Answer

How to change my router's MAC address Netopia 3397G

Hello, i have Netopia 3000, 3397G but i dont know where to configure router's mac address, I need to clone my pc mac's on my netopia 3000 router.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Netopia Master
  • 27,725 Answers

Using a router is a great way to create a home or office network without having to spend a lot of money.
As long as you have a broadband Internet connection through an Internet service provider, you can use a router to get all of the computers in your home or office connected.
If you have chosen Netopia as your router brand of choice, you will have to configure it to make your network operable.

Power on your Netopia router, broadband modem and computer.
Open your Internet browser.
Type the router IP address, 192.168.1.254, into the address bar. Hit "Enter" on your keyboard. Log into your Netopia router with the username and password assigned to you by your Internet service provider.
Select "Expert Mode."
After entering expert mode, you will see a menu bar at the top of the configuration window.
Click on the "Home" tab. Many Internet service providers will ship your Netopia router to you preconfigured.
If it is preconfigured all of the fields, such as IP address, subnet mask and default gateway will already be populated. If the fields are not populated, proceed to the next step.


Click on the "Configure" tab. Select "WAN." Select "ATM." Enter the "VPI" and "VCI" numbers provided by your Internet service provider.
Choose your encapsulation option.
For example, "Routed IP," "PPPOE," etc... Click "Submit."

Select "WAN" on the left side of your configuration window.
Choose the "VCC1" option. Select the option to "Enable Interface."
If you do not have your own IP address, choose the option to "Obtain an IP Address Automatically."
If you do have your own IP address, uncheck the automatic IP address box.

Type in your IP address if you have your own.
Enter your subnet mask.
This information can be obtained from your Internet service provider.
Select the "NAT" option if you are using your own private IP address for your network connection. Click on "Submit."

Select "WAN" on the left side of your configuration window.
Ensure that there is a check in the "Gateway Option" box and "IP Address" is selected as the "Interface Type."
Type in your "Default Gateway" address.
This can be obtained from your Internet service provider.
Click "Submit."

Select the "Configure" tab at the top of your window. Select "LAN."
Select "Enable Interface."
Type in the IP address for your router and subnet mask. Click "Submit."

Click on the yellow caution symbol on the top right hand side of your window to save all configuration changes.
Click on "Save."
Restart your computer for the changes to become effective.


http://www.netopia.com/support/hardware/technotes/CQG_121.html

Posted on May 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find the mac address for the Netopia 3366c ent router


Typically a label on the router will display the MAC

Feb 26, 2015 | Netopia Computers & Internet

2 Answers

How to change my ditto mac address


The following procedure worked for me :

To change the MAC address of a Dane-Elec MyDitto Classic NAS, use the flash memory configuration hidden page :

http://(ip of your my-ditto)/flash.asp

- Enter the right MAC address (which is written on a sticker, under your my-ditto NAS... something like "001F1Fxxxxxx") in the field "NIC0 address:".
- Click the "Save settings" button. (The same page reloads, with empty fields : ignore it).
- Restart your my-ditto NAS (with the power switch).

After booting, the power led should stop blinking (stay lit), and your NAS should be available through PC client software (master/user usb keys) again.

If the problem remains or reappears (dummy MAC address again), the culprit could be the CR2032 lithium backup battery inside your my-ditto. In my 2-year-old NAS, this battery was too low (2.1V instead of expected 3V). To replace this battery on its socket, you have to open your NAS (voiding the warranty).

Good luck...Hope this helps someone !

cvoila

Sep 26, 2012 | Dane Elec Dane-Elec myDitto 1TB 2-Bay Home...

2 Answers

Need password to my cisco wireless router


For that press RESET button of your router for 10 seconds then it will automatic restart and reset. then connect router to computer lan port with lan cable. then you can access it with default ip addresshttp;//192.168.1.1 or http://192.168.1.2 Type user as 'admin" and password as "admin" or "1234" or "password" or blank then you can see configuration page of router. Then click on wireless->security then note down the password.It's your password to connect wireless.
Let me know if you need further assistance. thanks for using fixYa.

Oct 17, 2011 | Cisco Linksys E1000 WirelessN Broadband...

1 Answer

Hello. I have wireless Router 802.11g / 2.4GHz. I have 3 PC i my house , but can only be on the internett with one of my computers. How can I set up my Router, so I can be on the Internett with all 3...


Sorry my anwser can be in spanish or english only.-
1.- All the conectivity devices, have a fisical address, and this is called "Mac Address", and is unique in the World.
2.- So,your wireless router have ones, and each computers too.
3.- The ISP (Internet Source Provider), only permit the Mac Address of the First computer only, and It know only this, so the Router Mac Address is unknow for they, and the rest of computers too.
4.- But, you can configure the firmware of the Router, so it show to the ISP the First Computer Mac Address allways, and this you can do in Items "Lan Configure" writing "Clone Mac Addres".-
5.- So, the ISP don`t see the Router MAc Address, always will see the Firts computer Mac Address, and the Router share the Internet Conectivity with other computers without problem.-
6.-For to configure the Router, in the browser you must write the followen Ip : 192.168.0.1 or samthing lake that, for this you must have conected your computer to the Router with an Ethernet cable with RJ-45 connectors.-
That is all.-
sincerely.-

Aug 31, 2010 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

I have a motorola netopia model 3347-02 For some reason I cannot connect my Wii to the internet. Something is blocking it. Help please ?


try this trouble shooting guide. Please try the following troubleshooting: Are you using WEP or WPA security on your router? Log into the router using the default IP (consult your router's manual for assistance) Locate the "wireless security" section of your router settings and find the WEP or WPA key. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters). If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot. If you are using WPA, the Wii console is compatible with the following types: WPA - PSK (TKIP) WPA - PSK (AES) WPA2 - PSK (AES)
If your WEP or WPA key is correct, then the problem might be related to MAC address filtering: From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model). If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings). If the Mac address filter was disabled, then continue troubleshooting.

Check Nintendo's router info for special notes, if available, for your router. Click here to go to our Wireless Router lookup page. Use the drop-down box to select, if available, your router manufacturer. Click on your router's model number, if available. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration settings. To access these settings: On your PC, click "Start" and then "Run." Type "CMD" into the field that appears to open a new window. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings asked for by the Wii console during the Manual Setup process and enter them.

Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response. if you require further assistance please let me know and i will be glad to assist you. -Midwest-tek

Aug 14, 2010 | Arris Netopia 2240N-VGx Router

1 Answer

Does anyone know how to Do MAC address filtering on Thomson TG782T router?


1st. Have a look at the wireless card that is inserted in your computer, check the label it, will have the MAC address printed on the label. If the wireless card is inside the laptop then have a look at the properties of the wireless card - it should give the MAC address of the wireless card.

2nd. Connect a LAN cable to the wireless router and enter the router's configuration URL address and go to the wireless configuration - then click on MAC address filtering and enter the MAC address of the wireless card.

The router will only allow the MAC addresses that are in this table to connect to the router.

For further information on securing your wireless network, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Jun 16, 2010 | Computers & Internet

1 Answer

Wrong Kind of Ethernet Cable?


If you can still access the web based configuration on your linksys router (by going to 192.168.1.1 in your web browser) that means nothing is wrong with the cable/connections. However the ISP is not letting your router get access to the router since it doesn't have the same MAC address as your computer's ethernet card/port.

To change your routers MAC address to the sameone on your computer (So you ISP thinks its still the computer connected), you have to first go to start>run>type in cmd and when command prompt opens, type in "ipconfig -all", which lists your IP addresses, etc. Make sure you add the -all (With a space after ipconfig) or else you can get your computers MAC address. The Physical Address is your MAC address. Now once you obtained the MAC, go to your router configuration, and login. Then look for where you can set or clone the MAC address of the router. The default mac address could be on the bottom of the router, if so check for it and just look for that address in your web configuration, then change it to your computers MAC address.

Hope this will fix it!

Feb 28, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Netopia 3347


no i dont sorry. if i had the two i could find out but i dont have access to any. sorry

Jun 08, 2008 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

Xbox live


Hello!

Yes, the netopia router will work with xbox live. you just have to configure some settings on your router.

To configure your router for Xbox Live try the following steps below:

step 1: Open an Internet Explorer page. in address bar type your router ip address, That should take you to the Netopia's settings page
Step 2: On the menu to left click Firewall, set it to Low and Save Changes
Step 3: On the menu to left click Expert Mode, then Yes, enter Expert Mode
Step 4: On the menu to left click Configure, then Advanced, then NAT
Step 5: Where it says Service Name, scroll the list down to Xbox Live Games, click Enable and then Enable again
Step 6: On the menu to left click Configure, then Connection.
Step 7: In main page scroll down to the UPnP and put a check in the box. then Save

It should then restart the Netopia, and when it comes back on in a few seconds your XBOX LIVE should be good to go. If you are still experiencing problems accessing Xbox Live your Netopia may require a firmware upgrade.

May 10, 2008 | Netopia ADSL 2+ MODEM 10/100 EN AND USB...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Netopia Computers & Internet Experts

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Netopia Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...