Question about Kodak Esp 1.2 All-In-One Printer
"unable to detect paper edge" I have tried: * updating software. * turning off on... loads! * reset back to factory settings via the printer controls. * paper a4 ... in & out * paper a5 ... as above Still nothing, it just spits the paper out without printing. Can you please help ??
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Have you tried this procedure?
You can load plain envelopes into the paper tray of your Kodak ESP 3 All-in-One printer.
Important Do not use envelopes with cutouts or cellophane windows.
1 Remove any other paper from the paper tray.
2 Insert one or more envelopes into the right side of the paper tray with the print side down and
the envelope flaps on the right, pointing left.
3 Squeeze the paper-width guide and move it to its right-most position up against the envelopes.
4 Leave the paper tray open while the envelopes are loaded.
If you have and it's not printing correctly, there is probably a problem with the document you're trying to print.
Posted on Feb 01, 2009
I had exactly the same problem but was able to solve it by selecting "Reset All Settings". This is accessed via Main Menu/Printer Settings/Reset All Settings on the printer's screen.
Hope it works for you too.
Posted on Jun 23, 2009
Try upgrading your Firmware go to to this web www.kodak.com/go/5300downloads and look for firmware and download it, make sure that the printer is connected and turn on while downloading the firmware. thanks
Posted on Aug 12, 2009
The paper tray has some "fingers" that detect the paper.
Remove the paper and tap the sensors a few times to make sure they are not stuck.
Use lots of mamper, not just one sheet so that there is enough weight to press down on the sensors.
Perhaps it is Earth's gravity that is malfunctioning today :)
Posted on Sep 28, 2009
Tips for a great answer:
Jun 18, 2012 | Kodak EASYSHARE 5100 All-In-One Printer
Nov 04, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...
Oct 07, 2009 | Kodak ESP 5 Printer
Aug 17, 2009 | Canon imagePROGRAF iPF8000 Printer
Aug 11, 2009 | Kodak EASYSHARE 5100 All-In-One Printer
Jun 08, 2009 | Kodak EASYSHARE 5100 All-In-One Printer
Apr 04, 2009 | Kodak ESP 5 Printer
198 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: