Question about Computers & Internet
Cisco m10 wireless router
To connect to your wireless router, the router's wireless settings needs to be
configured with the SSID, encryption etc. and also the wireless cards in all
the laptops/computers needs to be configured with these router's wireless
settings. Then the laptops/desktop computers can communicate with your wireless
Connect a LAN cable from the Cisco - Linksys to the LAN port on your computer.
Open a browser and enter the Cisco - Linksys configuration URL
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
Posted on May 10, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: cisco 857 router
You might need to reset the password. In order to do this, follow these directions:
create a new account:
and that should let you login with bob/bob
Posted on Nov 30, 2008
Are you speaking about the password of the router or the password of the wireless network ?
If you don't know the password of the router , then you will need to reset the router and use the default password of the router.
Once you reset the router, you will need to reconfigure it.
If you are looking for the wireless password, you can find it on the set up page of the router.
You will need to open the set up page of the router.
Click here for step by step instructions
Posted on Jul 22, 2010
Sounds like the router needs to be reset..
Before you do a reset try to login to the router by typing 192.168.1.1 in the webrowser ..
If that fails then look on the back or under the router and there is a reset button. Press and hold for 10 sec ... The let sit for a min or 2 then try logging into it..
Note: That the router will have to be setup again. Default login admin for the password .. don't enter any usernames
Posted on Jul 22, 2010
Tips for a great answer:
Mar 01, 2014 | Linksys by Cisco Cisco Valet Plus Wireless...
on Jul 19, 2011 | Computers & Internet
Dec 09, 2013 | Linksys Valet by Cisco M10 Valet 4 Port...
Aug 24, 2013 | Cisco Valet Wireless Hotspot (M10)
May 09, 2013 | Cisco Valet Wireless Hotspot (M10)
Oct 29, 2012 | Cisco Linksys Wireless N Home Router...
May 30, 2012 | Cisco Valet Wireless Hotspot (M10)
Click on the button and select All programs.
On the All Programs sub-menu, locate and select Cisco Connect. This should launch Cisco Connect and take you to its main screen.
NOTE: If you are unable to locate Cisco Connect, it may not be installed yet. Download the latest Cisco Connect setup wizard from the Cisco Support page. After downloading, click on the Cisco Connect icon to launch the installation wizard.
Hope this will help...Thank you for using Fixya...
Feb 28, 2011 | Computers & Internet
Jan 07, 2011 | Computers & Internet
Jan 07, 2011 | Cisco Valet Wireless Hotspot (M10)
56 people viewed this question
Usually answered in minutes!