I have a Canon MP600P printer, a NETGEAR WGR613VAL wireless router and an iMac. The printer is working fine with USB and LAN but I can't get it to work with the wireless network. When I log on the scanner with the browser it says that the Signal Level is 0% and the Link Quality also is 0%. I also removed the wireless encryption on the router and reset the printer LAN settings, but it still won't work.
Does anybody have the problem?
You have to make sure the ip address is correct on modem and computer port
If you need further help, I’m available over the phone at https://www.6ya.com/expert/alex_22751bbefa74c3d0
SOURCE: Canon MP600R working on a
Please get new driver here:
www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts
jay uth
SOURCE: Canon MP600R printer won't scan
http://www.printerinfo.com/content/Canon-Pixma-MP600-Multifunction-Printer-Review/Setup--Drivers-and-Software.htm
Hi I hope this link will be of help to youKind regards
234 views
Usually answered in minutes!
×