Question about Panasonic NN-S541 Microwave Oven
The above error message has appeared on my Panasonic microwave but there is no mention of it in my bookley. What does it mean
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
When you enter the time and press Start:
Does the inside light come on?
Does the turntable rotate?
Do you hear the internal cooling fan running?
Does the time count down?
Posted on May 30, 2008
SOURCE: We have a panasonic inverter
H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.
Due to the lethal voltages used and produced, I do not recommend that an inexperienced person work on these.
You can find an authorized Panasonic servicer here.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
Posted on Nov 09, 2008
If it was done by a repair place just take it back and read the riot act to them. Thats NOT acceptable. If you did it yourself, I would guess it wasn't just the magnetron, probably high power diode and other things too.
Posted on Feb 21, 2010
Hi, if the digital programmer circuit / controller does not get a feedback signal from the inverter for a period of 3 seconds, the controller will stop the cook cycle.
It may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.
If it stops at 16 seconds and is a sensor model, it probably has a defective humidity sensor.
If it stops after 7 seconds, it has a problem with the inverter.
If it stops after 22 seconds, that means the controller has detected a problem, usually a problem with the inverter, controller, magnetron, or a bad connection from one or the other.
So you have to use this as a guideline in troubleshooting and finding the exact cause of the problem, get the faulty part and replace it if and only you are technical sound and inclined.
And remember kindergarten rule #1 "If in doubt, don't" with everything that is potentially dangerous. Electricity kills so a service repair bill may be a better solution.
Due to the lethal voltages used and produced in inverters, i advice you should be very careful when trying to fix the microwave
Posted on Nov 29, 2010
Tips for a great answer:
Oct 19, 2017 | Panasonic Microwave Ovens
Sep 22, 2017 | Panasonic Microwave Ovens
Jan 12, 2016 | Microwave Ovens
Dec 16, 2015 | Microwave Ovens
Mar 17, 2015 | Panasonic NN-H264 Microwave Oven
Oct 12, 2014 | Microwave Ovens
Apr 20, 2012 | Panasonic Microwave Ovens
Feb 20, 2010 | Panasonic NN-P294WF Microwave Oven
May 25, 2008 | Panasonic Microwave Ovens
247 people viewed this question
Usually answered in minutes!