Question about Dishwashers

1 Answer

C8 error on Electrolux commercial dishwasher - Dishwashers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

A C8 error means that the boiler isn't emptying correctly during the rinse phase. Check to make sure that the boiler and the spray arms are clear of scaly buildup or anything else that could plug them. You want to make sure that the rinse pump and the level sensor are in proper working condition too.
If you do find something that you think could be the cause of the emptying problem, check it out before you reset the code. This is one of those really important codes, because if you just reset it without fixing it, the boiler heating elements may end up working dry and that can seriously damage your equipment.
Hope that's helpful!

Posted on May 20, 2013

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10 Answers

SOURCE: Electrolux dishwasher error c8 What does this

C8 means that at the rinse phase the boiler did not empty.
The reasons are ..
1) the nozzles are blockled
2)Drain pump out of order
3) bad luck
now you must reset c8 from the parameter in order to start again the diswasher
kostas

Posted on Feb 11, 2011

  • 56 Answers

SOURCE: need a manual for electrolux

There should be a customer service phone somewhere on the door to order a manual , or you can go on-line to Electrolux.com with the model # etc. and order one that way. Good luck, best regards.

Posted on Feb 01, 2011

  • 2509 Answers

SOURCE: Electrolux dishwasher wt65h shoing

If there is a set button hold it in for 5 secs!
I hope I have been of help but please do not hesitate to ask if you have any further questions.

I appreciate your vote if you appreciate my reply and remember, even if you don't vote for me a please and thank you goes a long way

Posted on Mar 06, 2011

  • 257 Answers

SOURCE: electrolux wt55 error code c8

If there is a set button hold it for 5 seconds.
C8 means that at the rinse phase the boiler did not empty.
The reasons are ..
1) the nozzles are blockled
2)Drain pump out of order
now you must reset c8 from the parameter in order to start again the dishwasher

Posted on May 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my Electrolux commercial dishwasher come up with error code A1?


Check Water supply (valve, filter, pressure)
Check that the overflow pipe is inserted

Jul 12, 2016 | Electrolux commercial undercounter...

1 Answer

Reset electrolux c 8 error


Hello cjsmith12345 - Are you certain the error code is C8? However, if you are receiving an error code E08 it typically indicates a shorted keypad, or a faulty User Interface Board. Depending on the model, these components may be the same. To reset, turn the power off to the unit for two minutes. This may be done by either unplugging it or flipping the household circuit breaker off and then restart unit. If error reoccurs, I would strongly recommend contacting a professional to make the necessary repairs. Unfortunately, most electronic parts cannot be returned so it is always a good idea to get the appropriate diagnosis prior to making any unnecessary part replacements.

Mar 04, 2013 | Electrolux Frigidaire Professional Series...

1 Answer

Dishwasher electrolux wt30 error code c8


Hello Said Raji - Are you certain the error code is C8? Could it possibly be CE? If so, it typically indicates that the dishwasher has detected a configuration error. A professional will need to check the wiring connections between keypad and main control board.

Jan 16, 2013 | Electrolux WT30H240DU Dishwasher

1 Answer

DISHWASHWER WT 65 EIM:ERROR CODE C8.WHAT DOES IT MEAN?


according to the manual...error code 8 indicates a problem with the control panel. here is the link to this manual...page 21 of the pdf http://manuals.electroluxusa.com/prodinfo_pdf/Kinston/154671101en.pdf
Hope this helps you! PS, this model number in the link may or not be similar to yours I had a problem locating your exact machine..so let me know if it isn't the right one and I'll go look some more. meantime...is there another model number on the inside side of the washer door?

Jun 21, 2012 | Electrolux Dishwashers

1 Answer

Electrolux wt55 error code c8


If there is a set button hold it for 5 seconds.
C8 means that at the rinse phase the boiler did not empty.
The reasons are ..
1) the nozzles are blockled
2)Drain pump out of order
now you must reset c8 from the parameter in order to start again the dishwasher

May 05, 2011 | Dishwashers

2 Answers

Electrolux dishwasher wt65h shoing error code c8. How do I reset? Another posting said to reset from the parameter? can someone explain?


If there is a set button hold it in for 5 secs!
I hope I have been of help but please do not hesitate to ask if you have any further questions.

I appreciate your vote if you appreciate my reply and remember, even if you don't vote for me a please and thank you goes a long way

Mar 06, 2011 | Electrolux 504199 Dishwasher

1 Answer

What does the display C 8 stand for as i am not able to start the dishwasher


C8 means that at the rinse phase the boiler did not empty.
The reasons are ..
1) the nozzles are blockled
2)Drain pump out of order
3) bad luck
now you must reset c8 from the parameter in order to start again the diswasher
kostas

Jan 17, 2011 | Electrolux 504199 Dishwasher

1 Answer

Electrolux dishwasher error c8 What does this mean please??


C8 means that at the rinse phase the boiler did not empty.
The reasons are ..
1) the nozzles are blockled
2)Drain pump out of order
3) bad luck
now you must reset c8 from the parameter in order to start again the diswasher
kostas

Nov 08, 2010 | Electrolux 504199 Dishwasher

2 Answers

Need owner service manual


Do not need service manual is 300 pages .
Ask what you want and I answer

Sep 14, 2010 | Electrolux 504199 Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Owen Barnes

Level 3 Expert

867 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...