Question about Washing Machines
Posted by Anonymous on
The problem is on sensor's cable contacts (pins).
It seems that when the machine is working, the vibration "disconnects" the cable from the sensor.
I tried to clean contacts (pins) many times, but the problem reappeared after 2 or 3 weeks. So, I cut a little piece of sensor's plastic case to expose its contacts (pins) and solder directly the cable to sensor's contacts. This method solved the problem months ago.
Posted on Feb 23, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
"sensor drum" or (better) "position sensor" (service manual code : 55X3607 http://www.2shared.com/document/HqarbJ-V/TX768AF_FA.html ).
Problem : After three or more minutes the machine stops spining.
Solution : Check the service manual at page 12 & 13 and you will see a component (part 427) which has two little cords.
Disconnect and reconnect this plug thoe or three times in order the pins inside the plug to clear from the dirty. If you have you can spray it with some spray for electronics. After this power on your washing machine.
If this does not work you have to replace the position sensor as "bill.spyrakopoylos" says.
Hello bill, i'am goerge from greece too..........
Na eisai kala file!
Posted on Oct 27, 2012
Tips for a great answer:
Dec 13, 2016 | Garden
Dec 14, 2015 | Refrigerators
Oct 05, 2013 | Dmm Allis Chalmers Tractor D17,d17 Series...
May 27, 2013 | Washing Machines
Jul 28, 2012 | Riso Office Equipment & Supplies
Jul 18, 2010 | Dmm Allis Chalmers Tractor D17 Series 4...
Dec 07, 2009 | Dmm Allis Chalmers Tractor D17 Series 4...
95 people viewed this question
Usually answered in minutes!