Question about Lands Phones
Dont know how to access my voicemails/answer machine messages HELP PLEASE.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: greeting message change
push "GREETING" button and hold. It beep and you can record your new message while you hold it down. When complete release button. To play back just push button and release.
Posted on Aug 24, 2007
SOURCE: How to access messages remotely
While you are away from your home or
office, you can use a touch-tone phone,
or a pulse (rotary) phone with a pocket
tone dialer (available through your local
RadioShack store) to enter your PIN and
do any of the following:
• set the phone to answer or not
• listen to your messages
• record a new outgoing message
• erase messages
• monitor the room where the phone
• You cannot remotely operate the
phone using its handset or another
telephone on the same line as the
• You can also listen to the message
recorded on Line 2 by making a call
to Line 1’s number (or vice versa).
USING THE TOLL-SAVER
If RING TIME is set to TS (toll-saver),
(see “Setting the Number of Rings” on
Page 15), the phone answers after three
rings if you have new messages (ones
you have not listened to). If there are no
new messages, the phone answers after
five rings. This gives you time to hang
up before the phone answers so you
can avoid unnecessary long-distance
Note: Toll-saver works only on the line
you called. If Line 1 has no new messages,
but Line 2 has one, the telephone
answers after five rings when you
call Line 1.
Follow these steps to operate the phone
from a remote location.
Note: If you wait more than 15 seconds
between keypresses, the phone sounds
a long beep and hangs up.
1. Dial your phone number and wait for
the phone to answer.
2. If the phone is not set to answer
calls, it answers after about 10 rings
and sounds a series of beeps.
3. When the outgoing message begins
(or the phone sounds a series of
beeps), press #, then enter your PIN
within 2 seconds.
If the PIN is correct, the phone announces
the day and time, then it announces
the number of new and old messages.
The phone plays all new messages,
then beeps about every two seconds to
let you know it is ready to accept remote
• If the phone does not respond, try
entering your PIN again. If you enter
an incorrect PIN three times, the
phone beeps and hangs up.
Remote Operation 27
• When the phone is operating from a remote location, it stops all answering functions
and rC appears on the display on the base. The phone resumes answering
functions when it is no longer in remote operation, if you have not turned it off.
• The remote playback of incoming messages is limited to 4 minutes. If you have
more messages after 4 minutes have passed, you must press # 2 again to listen
to the rest of the messages.
• When using remote operation, you can only delete the current message during
playback. You cannot delete all the messages stored at one time.
The following table shows the remote commands you can use.
Note: Remote operation stops when someone picks up the handset and presses either
LINE 1 or LINE 2 (whichever is flashing), or any phone on the same phone line.
1 Repeat current message during playback.
2 Play messages.
3 Skip current message during playback.
4 Delete current message during playback.
5 Stop playback, recording, and room monitoring.
6 Set the phone to answer or not answer calls.
7 Record or stop recording a new outgoing message.
8 Play the outgoing message.
9 Switch to the other line (Line 1 or Line 2).
0 Monitor the room where the phone is located for 15 seconds
Posted on Mar 19, 2009
Push the top left button (looks like an audio tape).
Then push 9
It will display a 180second count down in which to record your voice message.
When finished, push the top right button (looks like and arrow into a diamond).
To turn off/on the answering machine:
I lost my user manual for my Doro 615R+1 home phone, so after much deliberation and playing with many buttom combinations, worked out how to turn off the answering machine.
- Open the answering machine function by pushing the top left button (looks like an audio tape).
- Push '0' and then use the up and down arrows to select On or Off.
- To enter your selection push the top right button (looks like and arrow into a diamond).
Posted on May 15, 2009
Tips for a great answer:
Feb 27, 2014 | Panasonic DECT 6.0 Expandable Cordless...
May 04, 2012 | Uniden DECT 6.0 Cordless Phone ID
Mar 06, 2012 | Panasonic DECT 6.0 Expandable Cordless...
Aug 22, 2011 | Vtech CS612954 Cordless Phone
Mar 02, 2011 | Doro Phone Easy
Jun 30, 2010 | Vtech DECT 6.0 Cordless Phone with Digital...
Dec 16, 2008 | Doro 520 DECT Cordless Phone
Mar 27, 2008 | Lands Phones
Jan 19, 2008 | Doro 830R Cordless Phone
Dec 10, 2017 | Lands Phones
86 people viewed this question
Usually answered in minutes!