Recall You need to recall this product it is dangers. my daughter got hurt in one that I bought at big lots. she hurt her neck & shourlds.

Try to recall how you first installed the pedal originally. see if you can reverse the procedure. Im sure it will take a little more effort as opposed to installing it. It may SNAP ON & LOCK. See instructions & even try to call the store or manufacturer! Good Luck, Frank M

Search Results

2005 Hyundai Tucson Recalls - Cars.com

www.cars.com/recalls/hyundai/tucson/2005/

Cars.comLook up all NHTSA vehicle safety recalls for your 2005 Hyundai Tucson, and contact a nearby service center for free repairs.

2005 Hyundai Tucson Problems, Defects & Complaints

www.carcomplaints.com/Hyundai/Tucson/2005/
7 days ago - The 2005 Hyundai Tucson has 199 problems & defects reported by ...January 11: Hyundai Genesis Recalled to Replace Dangerous Tires ...

Hyundai Tucson Recalls ' RepairPal

repairpal.com > Recalls > Hyundai
Other systems that may be affected include: cruise control, push-button start, gear shifter, and Electronic Stability Control (ESC) system. Dealers will replace the brake light switch to correct this concern. ... The stop lamp switch may fail, affecting many vehicle systems including ...

2005 Hyundai Tucson Recall - Learn About Recalls for 2005 ...

www.automd.com > Recalls and TSBs > Hyundai Recall > Tucson

I would take it to Big Lots, with your receipt, and exchange it. This is not a user serviceable problem.

Repost in correct catagory

recalls are listed here: http://www.edmunds.com/car-maintenance/recalls.html?year=2002&make=&model=&styleId=100003002&engCode=6INAG4.0&transCode=AUTOMATIC&mileage=100000&zip=45390&type=recall

I don't see one for the rail. Recommend you relieve the pressure, mix up some JB Weld epoxy, and put a big glob on there. Make sure it is set enough not to slide off, then let it set overnight. It might take a few overnight applications to seal it. This is ugly but a lot easier than replacing the rail. It might at least get you by until it's convenient to take the rail off.

need to bring it to a reputabile auto repair shop & have a 4 wheel alignment to prove if there is a problem then you can submit to gm for warranty

I know five (5) people who purchased the 2009 or 2010 Expedition. All 100% of them have complaints of the headrest hurting their neck. I know folks that won't even drive their new 2010 Expedition because it hurts their necks, and the dealer won't take it back! If enough people tell ford about the problem, erhaps Ford will post a Technical Service Bulletin (TSB) to tell dealers how to fix the problem. It is possible to build safe headrests that do not hurt necks during normal driving: just look at the competition. The headrest is not the right equipment to sacrifice comfort. Neck pain causes distraction and is a safety issue. Ford should be as concerned about liability from wrecks caused by headrest pian distractions as they are about the rear impact safety. Complain to Ford!

I strongly recommend you call chrysler to see if there is any recalls for the vehicle. If not have the vehicle towed to a repair facility for repair. You're talking about an extremely dangerous situation and don't want anyone hurt or worse.

Sorry to Hear. This problem goes back to a 2001 Optima binding intermittantly over the years. I bought a new lock mechanism and installed it my self. Took me 2.5 hrs. It is like all metal rods HUB, located near key way cylinder inside door. I had to hack saw off one of the old rods just to get old HUB off. Fortunately, the new HUB came with the exact rod.