Question about Toshiba Computers & Internet

1 Answer

Why do I get insufficient permission exe when I try to download pc cleaner

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toshiba Master
  • 5,660 Answers

Why do you want to download PC Cleaner, is the question?

I'd sooner stick needles in my eye.

1) Remove all programs you do not use, Except Windows programs.
Control Panel > Add/Remove Programs

2) Remove personal documents you can live without.
Photos, music, videos, and personal documents you have created, or downloaded.

3) Download and use CCleaner.
It's a registry cleaner that is free
The free version works as well as paid for registry cleaners, and better than some.

Every time you delete a program, or application; fragmented files are left behind.
When you visit a website, cookies are attached.
These are just some of the tidbits left behind.

Get rid of the junk

They take up ROOM...........

When a Harddrive is 50 percent full, you start noticing the computer slowing down.
As the harddrive reaches 70 percent full, you Really notice it.

Remember how fast the computer was when you first got it?
Didn't have all that junk on it.

I can guide you in using downloading, installing, and using CCleaner. I use it daily.
It's easy. Click on two buttons while in Cleaner mode.
(Analyze/Run Cleaner)
Click on two buttons in the Registry mode.
(Scan for Issues/ Fix Selected Issues)

Lastly defrag your harddrive





Click on the screenshots to see examples of the user interface
The top one, and the third one down is the one's you use.
Others are for more advanced settings, and I can guide you there, also.
Do not recommend using advanced settings, unless you are an advanced user; and respectively, you are not.

(Or you would know about PC Cleaner)

Posted on May 07, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I get root permissions back in my phone for lg ms500 optimus f6

need to take it to your provider and ask them to help you

Mar 01, 2015 | LG Cell Phones

1 Answer

How to restore ipod classic

Kernel Recovery for iPod software is really very efficient tool that repairs and recovers all type of deleted or lost data from iPod even formatted or corrupted iPod. You can get more information about iPod recovery software from here:

Jan 09, 2014 | Audio Players & Recorders

1 Answer

Permissions to download like pc cleaner on my xp laptop

You need to get the administration password from the previous owner. Or from the person who installed your operating system.

Oct 21, 2013 | Computers & Internet

3 Answers

VMware workstation Error:Insufficient permission to access file.


I got the same problem and finally found the solution myself.
You need to un tick the read-only box from the file properties. See the photo below:


Jul 18, 2013 | Computers & Internet

1 Answer

I can download programs but they won't run as I get msg.

Try rebooting. This comes up from time to time. It went away on its own for me.

Aug 23, 2012 | Microsoft Windows XP Home Edition English...

2 Answers

I can't install downloads from Microsoft or anywhere.


please go through the following link to see your option

If does not resolve your problem, let me know i will give you some other alternate options.

Kind Regards,


Oct 29, 2009 | Computers & Internet

3 Answers

VMWARE : Unable to open the VMDK file

Check the NTFS permissions on the file, change to EVERYONE Full Access if necessary to get it to work.

Apr 11, 2009 | Computers & Internet

1 Answer

What is Utool.exe files..??

try kaspersky antivirus 2011 trial version download it from kaspersky lab i hope it would help you a lot...

Feb 20, 2009 | Computer Associates Anti-Virus Plus...

1 Answer

Camera wont download the photos.

if you are using windows vista use the following above link to download the new driver.

1) Please install the Disney Pix 2 software and the Disney Pix Micro Downloader to your computer via the software CD that came with the Disney Pix Micro
2) Please double-click on the "Setup" to begin the install of the Pix Micro drivers. The User Account Control will appear warning you that a program is trying to run. Please click "Allow".
3) Complete the install of the driver by following the prompts.
4) After the install completes, you are prompted to restart the computer. Please select "Restart now" and then click "Finish".
5) You can now delete the Setup program from your computer
6) Connect your Disney Pix Micro to the computer and wait for the device to install.
7) Double-Click on the Downloader shortcut to open the downloader
Now the Pix Micro Downloader is open with the correct privileges and the Pix Micro camera is connected. If you click the "Download" button. A dialog box appears saying "Pixel Up".
Please click the "OK" button and the download will complete successfully. The images can even be deleted via the downloader after the images are downloaded. Although, every time you open the downloader, you must run it as an administrator and every time you download, the "Pixel Up" box will appear.

If you are having a problem installing a product that uses InstallShield as their installation tool, and the steps below do not resolve your issue, you will need to contact the vendor of the software, as we cannot provide further support. Your vendor, who used InstallShield as an installation tool, created the product that you are trying to install. It is very likely that the error you are getting is related to how the vendor used our product and only the vendor would know which InstallShield product they used, which version and how they programmed it. Thank you for your understanding and patience.

This article applies to the following errors when trying to install an application that uses InstallShield:

Error extracting support files
Error installing Ikernel.exe (0x any number)
Access is denied
Error loading Type Library/DLL


Detect Version
Different troubleshooting steps are necessary for different version of InstallShield. To check the version of InstallShield Professional that was used to create the setup, take the following steps:

1.Right-click on the setup.exe
2.Select "Properties".
3.In the Properties dialog, select the tab labeled "Version".
4.Near the top there will be a filed labeled "File Version". The number specified here will tell you approximately what version of InstallShield was used to create this install.

InstallShield 5.x and 3.x
If the version of InstallShield is less than 6.00, see article Q100198, HOWTO: Eliminating General Setup Initialization Errors.

InstallShield 6.x
If the version is 6.00 or greater, continue with the following steps.

Setup initialization errors can be caused by a number of factors. This is a non-exhaustive list of possible resolutions:

1.Insufficient permissions on the machine. If you are using a Windows NT or a Windows 2000 machine, you need to have administrative permissions to run an InstallShield Professional 6.x setup. Make sure you have the correct permissions.

2.If you just ran an InstallShield setup, the engine takes a few seconds at the end of the installation to clean up. During this time Ikernel.exe (the engine file) is running in memory from a previous process. That is why you are not allowed to launch another setup. Waiting a few seconds and running the setup again should resolve this.

3.Check and make sure Ikernel.exe is not in memory. If it is, and no setup is running at the time, end that task and restart the system.

4.Clean out the Temp directory.

5.Delete the Program Files\Common Files\InstallShield\Engine folder and then rerun the setup.

6.Reinstalling Internet Explorer (IE) 5.x can also repair a number of corrupted/missing core Windows files from your machine, so reinstalling IE 5.x and the NT service pack is also suggested.

7.Another possibility is that you do not have sufficient COM permissions. For information on how to troubleshoot this, see article Q104986, INFO: Initialization Error Troubleshooting.

8.The other potential cause is a missing Stdole.tlb file. This is a core Windows file and should exist on your machine. Make sure that if you get this file from another machine, the machine is running the same operation system as the machine you are trying to run the setup on.

9.If you are trying to install to a Windows 98 machine, download and run Dcom98.exe from the following site:

10.Make sure that you are using the latest version of the InstallShield engine. To install the latest engine see article Q105097, INFO: Install the Latest Version of Ikernel.exe

Aug 01, 2008 | Disney Pix Micro Digital Camera

1 Answer

Cmd.exe file nit working

repair your windows maby cused by bug too run a spyware cleaner see if it gets anything sumtimes bugs will disable it u could back it all up redo it also

Jan 25, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

7993 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides