Question about Audio Players & Recorders
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Protect mode will kicking whenever a fault is detected.
Causes that can start protect mode are:
Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.
Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.
Internal fault is the natural cause for protect mode. If all the above did not work, then the problem is a blown component or an internal fault. In this case the unit must be taken apart , tested and repaired by an experienced person.
If the unit is less than one year old, or if you want to get service, call Sony at the phone number listed on the product documentation.
Posted on May 04, 2009
there is no info for a 310,but,there is for a 305,you need to make some cables for it,you need some rca cables with one end cut off,the rca plugs into the tv audio output,the two wires from each one,go into the push connectors,treat the outside wire as neg(black) and inside wire is always pos(red),,the top 2 push posts on the left are for the left audio from your tv,the 2 posts on the right are for the right tv audio,there are 4 more connectors for another device,like a dvd etc,push connectors operate by pushing in on them and pushing the bare wire into the little hole and releasing,
this is the only pic available,the 4 push connectors on the right are,tv right,pos,,tv right neg,then other audio right neg.,,the bottom one is other audio pos,,,,the 4 on the left side are left tv audio pos,,then left tv audio neg,then other audio left nrg,,then left other audio pos,,,
this is like what you need,the red is positive and bare is neg
Posted on May 27, 2015
Any tips form here?
WD 305HT 1000 watts system power
Posted on May 27, 2015
Tips for a great answer:
May 27, 2015 | home Audio Players & Recorders
Sep 05, 2014 | Sony DAV-TZ130 DVD Home Theatre System -...
Jul 14, 2011 | Sony DAV-BC150 System
Apr 26, 2011 | LG LHT854 Theater System
Sep 13, 2009 | RCA RT2870 Theater System
Jan 10, 2009 | Panasonic Home Theater System System
Dec 14, 2007 | Panasonic SC-HT75 System
Nov 24, 2017 | Akai Audio Players & Recorders
270 people viewed this question
Usually answered in minutes!