Question about Frigidaire FDF50S Dehumidifier

Open Question

Error a5 seeing - Frigidaire FDF50S Dehumidifier

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Frigidaire LAD504TDL dehumidifier and code 'ES' shows on display. What does this code mean? Unit runs but not much water in tank.


Good Morning Mark, thank you for your post!

I see that your Frigidaire dehumidifier is displaying an error code of "ES" and you would like to the meaning of that error code. The "ES" error code stands for evaporator thermistor error. This could be a possible problem with your control panel, thermistor, or a wiring harness. I would recommend contacting your manufacturer for further assistance with your dehumidifier. Best of luck! -Matt

Jun 08, 2015 | Frigidaire Dehumidifiers

1 Answer

The F2 code is on in the humidity window of my Frigidaire dehumidifier? Not in manual. What does this mean?


Good Morning friend, thank you for your inquiry!
I see that you are having trouble with your Frigidaire dehumidifier displaying an error code of "F2". Typically, an "F2" error code stands for a miscommunication error. This could be a possible problem with a sensor or control panel. I would suggest performing a reset and that can be completed by disconnecting the power from your dehumidifier for roughly ten minutes. If you are still under warranty I would recommend contacting your manufacturer to see if any additional assistance can be provided. Hopefully this is helpful. -Matt

Feb 13, 2015 | Frigidaire Dehumidifiers

1 Answer

The fan on my bqdd122fw is not working check light comes on all filers are clean and tank is empty and secure


the fact that the fan wont run , is a tip off that (barring the fan has gottn stuck) the water collection bucket float switch has gotten out of adjustment , this might require a little trial and error to see just what posisition this little device needs to be in for the unit to run

Dec 17, 2014 | Dehumidifiers

1 Answer

When I turn on my dehumidifier the symbol E1 appears. Can anybody answer this?


It's not cooling. Unplug it and try to defrost it with a blow dryer. Then, plug it back in and see if the error code goes away. If it doesn't, most likely the coolant has leaked out and you will need to have it fixed and recharged.
Good luck!

Oct 26, 2014 | Danby Dehumidifiers

1 Answer

What is A5 on our frididare dehumidifier?


Hello Friend, this is Z. I am happy to assist you!

If you are receiving an error code AS on your Frigidaire dehumidifier, it typically means that your dehumidifier is experiencing a sensor failure. Because it is a smaller appliance, repairs are often more costly than the actual appliance replacement. Is your appliance still in warranty? If so, you might want to reach out directly to the manufacturer to determine the coverage on your dehumidifier and the procedures to any potential remedy in that regard. Best of luck!

Jul 27, 2014 | Frigidaire FDL50R1 Dehumidifier

1 Answer

Displaying "A5"


Do you mean error code AS instead of A5? If so, error code AS commonly refers to a sensor issue. Because it is a smaller appliance, repairs are often more costly than the actual unit replacement. You may want to check and see if your dehumidifier is still under warranty and if so, reach out to the manufacturer to determine the exact warranty coverage.

Dec 21, 2013 | Frigidaire FAD704DUD Dehumidifier

1 Answer

The fan runs, but we get an A5 error.


I think what you're actually seeing is an AS error. It's looks like A5 on the LED screen.
AS error means their is a sensor failure. So, before calling Frigidaire Tech Service
(800-444-4944), turn the Master On/Off Switch to OFF. Unplug the unit for 12 - 15 minutes.
This should give the unit ample time to reset itself. Plug the unit back in and turn the Master ON/Off Switch to ON. Now, set your controls as you normally do. If the unit starts up and runs as it should, the problem for now is solved. If it keeps re-occurring, contact Frigidaire Tech Service.

Apr 06, 2011 | Frigidaire FDF50S Dehumidifier

1 Answer

Our delonghi de400p dehumidifier shows an E3 error message. Customer Service says its a sensor but can't tell us what sensor. Any help would be appreciated.


I have a 40 pint and a 50 pint that are very similar. The 40 pint has the e3 error. Experimenting with the 50 pint, I found if I disconnected a particular sensor I got the e3 error. That sensor is a little can with two black wires (smaller than a AAA battery but shaped like that). It is attached to the cooling coils so must be a temperature sensor. This is not the little circuit board sensor mounted in the middle of the radiator in a plastic box/clip thing.

I am now about to see that part to see if I can replace it.

Jul 09, 2010 | DeLonghi DE400 Dehumidifier

1 Answer

F2 ON THE DISPLAY / WILL NOT RUN / MODEL FDB30R1


hello sir/mam
this is because of the error in the programme so please switch OFF for 1 mint and switch ON then see the display.

Oct 08, 2009 | Dehumidifiers

Not finding what you are looking for?
Frigidaire FDF50S Dehumidifier Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dehumidifiers Experts

Charles T Nevin
Charles T Nevin

Level 3 Expert

4066 Answers

john h

Level 3 Expert

12650 Answers

mike cooper

Level 3 Expert

884 Answers

Are you a Frigidaire Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...