Question about Standard Horizon Cp180i Gps Chartplotter With Int Ant

Open Question

Standard horizon cp not working - Standard Horizon Cp180i Gps Chartplotter With Int Ant

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4090 Answers

SOURCE: standard horizon 155c not acquiring signal

If the signal is good statement seems to imply that it is working, perhaps this is my misinterpretation of what you mean by this.
Signal refers to the abi;ity to connect to satellites
4 are requied for triangulation.
If the unit is fully charged and not connecting , then it is quite possible that the unit has a damaged SIIRF chip or whatever chip was used in your model to acquire satellite connection. The cost of repair is costly, it means total replacement of the M/Board.
Never start car with the unit connected into DC car power, spikes will damage the chip

Posted on Jun 30, 2009

tech4allmen
  • 666 Answers

SOURCE: I have a Standard Horizon

Hi,

For an unexplanable reason, yes it does. These equipments, GPS antennas, Broadband Canopies, sattellite dishes, TV antennas, etc., are prone to EMIs or Electro-Magnetic Interferences which causes blurry signal, signal blockage, or even causes busted units. These equipments are not like regular electronic devices which you can fix if you have a service manual, NO. Why? Let's say you found something burnt on it mainboard, you replaced it, it still will not be able to detect signals. Manufacturer's strategy? Who knows.

Posted on Aug 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need an operating manual for a Standard Horizon CP155c chartplotter


please call Standard Horizon Marine Support 800-767-2450 and they will email you the manual.

marinetech@vxstdusa. com

Sep 10, 2010 | Standard Horizon CP155C GPS Receiver

Tip

What do you mean by hold the bottom right corner of the screen. It isnt a touch...


1- Turn off unit.  2- press and hold the bottom right corner of the screen. 3-While still pressing and holding bottom right corner, press and hold power button and continue holding both until a white screen appears with a black dot. 4- follow the on screen directions and your unit will be back to the day you first got it.

on Jul 25, 2008 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Screen says c card invalid


Your best bet here would be to either head for a marine chandlery that handles these C-Cards and have them plug yours into one of their chartplotters or a vessel nearby that uses the same cartridge.

If your card works on theirs chartplotter, the problem lies within your CP150. If they get the same fault displayed as you do on your unit, for some reason the Card has a fault.

Hope this helps.

May 02, 2010 | Standard Horizon CP-150 WAAS GPS Receiver

1 Answer

It does not aquire satelites, a new aerial has been fitted and everything else seems ok.


Check voltage at the plotter antenna outlet. It should be at least 5 Volts .if not you have a blown internal fuse

Jan 03, 2010 | Standard Horizon CP-150 WAAS GPS Receiver

1 Answer

I dont have C-kard.


Hi
I dont have have C kard . I ask the application of type of card -where I can
buy with software .
Stanley

Aug 22, 2009 | Standard Horizon CP-150 WAAS GPS Receiver

1 Answer

C card invalid


I don't have C-card .what shall I do ?when I can by this card?

Aug 12, 2009 | Standard Horizon CP-150 WAAS GPS Receiver

1 Answer

Standard horizon 155c not acquiring signal


If the signal is good statement seems to imply that it is working, perhaps this is my misinterpretation of what you mean by this.
Signal refers to the abi;ity to connect to satellites
4 are requied for triangulation.
If the unit is fully charged and not connecting , then it is quite possible that the unit has a damaged SIIRF chip or whatever chip was used in your model to acquire satellite connection. The cost of repair is costly, it means total replacement of the M/Board.
Never start car with the unit connected into DC car power, spikes will damage the chip

Jun 30, 2009 | Standard Horizon CP-150 WAAS GPS Receiver

1 Answer

Help


supposedly not you only need a card for more detailed maps

Nov 15, 2008 | Standard Horizon CP-150 WAAS GPS Receiver

1 Answer

CP 160


I can not put the name of the points on my gps chart 160

May 26, 2008 | Standard Horizon CP160 GPS Receiver

2 Answers

Power cord


I called standard horizon myself and bought the power cord for $25. The # 714-827-7600

Nov 12, 2007 | Standard Horizon CP150 GPS Receiver

Not finding what you are looking for?
Standard Horizon Cp180i Gps Chartplotter With Int Ant Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard Horizon Boating Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Standard Horizon Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...