Question about Computers & Internet
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
WHAT? Friday is beer, and CS:S night??
Well why didn't you say that BEFORE?
We gotta get this thing Fixed!
(I'm just kidding around a little, don't be hatin'. By the way, my GATEWAY 7200X is 6 years old, and still kickin' booty, with an ATI Radeon X600XT graphics card.
No, Adobe Photoshop, not gamin')
From your diagnosis so far it sounds like you have a driver conflict.
When you install a hardware device, Windows breaks it's neck to find compatible drivers.
If, THE, drivers are not there Windows will search through it's thousands of generic drivers, and choose one.
You come along, and install THE drivers the graphics card needs.
Now you will have a driver conflict.
Windows: "Which drivers do I use? These or THESE?"
1) I would like you to unplug your computer from power. (Computer off of course)
Observe anti-static precautions.
Your body carries Static electricity.
Static WILL fry out the delicate hardware components of a computer.
You may not even see it, or feel it.
Your computer will. POOF!
Working on a table, computer unplugged from power, computer case open. Touch the metal frame of the open computer case to relieve your body of Static.
(Or wear an ESD wrist strap, and connect the alligator clip to the metal frame of the open computer case. They're about $6)
If you get up in the middle of working on your computer, and leave, upon your return Touch the metal frame again.
2) Remove the ATI graphics card.
3) Plug your monitor back into the integrated graphics port. (VGA port on motherboard.
4) Push the Power On button in, and hold it in. Hold it in for a count of Five seconds. (Count 1001, 1002, 1003, 1004, 1005)
Let go of the Power On button.
Do this procedure two more times.
What you are doing is setting BIOS back to the factory default settings, and clearing CMOS Error Codes.
5) Plug the computer back into power. WAIT 1 minute.
Turn the computer on.
Left-click on Start, Control Panel, then on Add/Remove Programs.
Remove anything you see associated with ATI in it.
If upon removing the ATI software, you are asked if you want to restart your computer, NO.
Close all windows, go back to your desktop screen.
Pull out the CD disk, that came with the Radeon X800XT graphics card.
Put it in your optical drive, and install the software from that disk.
It contains the Drivers.
A Driver is a small piece of software that allows 'communication' between a device, (Such as a graphics card), and the computer.
If you are asked to restart your computer, NO.
Shut your computer down normally.
(Start>Turn Off Computer>Turn Off)
Unplug your computer from power. Observe anti-static precautions.
Reinstall the ATI graphics card.
Plug your monitor into the graphics card.
Now, before we go further let's discuss the additional power cable you are plugging into the X800XT.
I wasn't aware that the old X800XT's needed an additional power cable.
I read the ATI Radeon X800 PCI Express Series User's Guide, and it seems it does use one,
[Radeon X800 PCI Express Series User's Guide - 729.51 KB (pdf) -12/31/2003]
What I want to know is what kind of power cable is it? The 300 Watt power supply in the Gateway 420GR, doesn't have any specialized power cables, other than a 4-pin ATX +12 Volt power cable, and SATA power cable.
A specialized power cable for a graphics card would be a 6-pin PCI Express power cable, or an 8-pin PCI Express power cable.
Continued in an additional Comment.
Posted on Jun 08, 2010
look up your number pc and specs in google i found this,
x16 PCI Express (available), x1 PCI Express (available)
Open the case see if there is eather 1 or 2 yellow bleu or green slots, the long ones with a clip on the back, agp are usualy brown.
If you put a card in remember to clip it and when you remove the card unclip it.
Before you damage the slot.
Posted on May 02, 2012
Tips for a great answer:
Sep 08, 2012 | Computers & Internet
Jul 04, 2011 | Intel Desktop Board D915PGN - Motherboard...
Mar 14, 2011 | Intel Entry Server Board S3210SHLC -...
Thank you!" - paul7of9
Click here for "Manual: http://downloadmirror.intel.com/15054/eng/DG965SS_TechProdSpec.pdf
Mar 13, 2011 | Intel DG965SS Motherboard
Mar 01, 2011 | Biostar 945GC-M7 TE Motherboard - v6.0,...
Nov 03, 2010 | Intel D915GAV Motherboard
Apr 16, 2009 | Intel D865GVHZ Motherboard
May 13, 2008 | Graphics BV200 BizView 128MB (128 MB) PCI...
May 06, 2008 | ASUS A8V-VM SE (MB-A8VVMSE) Motherboard
Dec 14, 2007 | EliteGroup (ECS 915PL-A2) Motherboard
87 people viewed this question
Usually answered in minutes!