Question about Sport & Outdoor - Others

1 Answer

Can't fix my shotgun after opening it

I have opened my 12 GA MAVERICK pump action shotgun into parts but can't fix it now

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When you say you can't fix it do you mean you can't put it back together?

Posted on May 06, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 474 Answers

SOURCE: I own a Maverick model 88, 12 gauge shotgun. Need plug

the plug is ussaly no more than a wooden dowel that fits inside the spring and is the approx length of the shells put end to end like they would be in the tube

Posted on Oct 12, 2009

  • 90 Answers

SOURCE: Where can I find parts for Chinese Jing An 12 ga

A gun part shop or search the part on an online new or used gun store.

Posted on Jan 04, 2011

SOURCE: How to disassmble and replace

Hi,
Check this links out regarding your Query, for Manuals.
Link1 Link2 Link3
Check the links for more information regarding the Dis-assembly that you need and information related to your query for details.
I hope this will help.

Posted on Aug 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a forend for a stevens double barrrel model 225


Stevens Shotgun Parts ' eBay

www.ebay.com > ... > Hunting > Gun Parts > Shotgun Parts > Stevens Shotgun Parts
Rating: 4 - ‎7 reviews
Results in Stevens Shotgun Parts ... Double Barrel 30" Side By Side Shotgun Barrel ... Stevens Savage Arms Model 77B 12-ga shotgun parts, trigger assembly.

Savage/Stevens/Springfield/Fox - Numrich Gun Parts

https://www.gunpartscorp.com > Manufacturers Need gun parts and accessories for SAV/STEV/SPGFLD? Look no further, Numrich has everything you need right here for SAV/STEV/SPGFLD.

225 DBL BARREL Accessories ' Numrich Gun Parts

www.gunpartscorp.com > Categories > Savage/Stevens/Springfield/Fox ManufacturerSTEVENS, Model225 DOUBLE BARREL, 325 DOUBLE BARREL, Product #995740, DescriptionFiring Pin, Price$24.85, Add To CartSold Out.

Savage Shotgun Parts, Stevens Shotgun Parts,Springfield Shotgun ...

www.gun-parts.com/savageshotgun/ ... Barrel Shoptgun Parts, Stevens Shotgun Barrels, Stevens Double Barrel Shotgun ... many Contract Gun Models. ..... #14 Bolt 340/840 30-30 or 225 5 Rd..

Shotgunworld.com - Find your shotgun parts here.

www.shotgunworld.com/parts.html Poppert's, Remington, Browning, Mossberg,Stevens,Winchester and L.C. Smith firing ... Remington, Mossberg, etc, Gun-Parts.com, Gun Parts for over 350 Models .... DOUBLE-BARRELED - A gun consisting of two barrels joined either side by ...
stevens double barrrel model 225 Google Search

Mar 06, 2017 | Optics

1 Answer

D669090 is the serial # of my Stevens 79 pump gun 30 barrel wanting to know the year it was made.


Have a read of these articles.

I Have Stevens Modle 79 Shotgun And Would Like To Know Rough ...

www.gunvaluesboard.com/i-have-stevens-modle-79-shotgun-and-would-like-to-kno...
  1. Cached
  2. Similar
I have Stevens Modle 79 shotgun and would like to know rough. ... hello,,your stevens model 79 pumpgun would be worth roughly around ... Serial number .

The Gun Digest Book of Exploded Gun Drawings: 975 Isometric Views

https://books.google.ca/books?isbn=0896891410 Harold Murtz - 2005 - ‎Antiques & Collectibles 845 Model 79-T Slide-Action Shotgun 845 Model 99 Lever-Action Rifle 846 ... 99C Lever-Action Rifle 847 Model 99C Series A Lever-Action Rifle (Serial No. ... Rifle 850 SAVAGE/STEVENS Model 89 Lever-Action Rifle 851 Model 94C Series M ...

Stevens 79 Shotgun Manufacture Date? - FirearmsTalk.com

www.firearmstalk.com > ... > Long Guns > General Shotgun Discussion
  1. Cached
May 19, 2011 - Twelve years ago I purchased a Stevens model 79 pump 12 gauge shotgun with a 30" barrel used. The serial # is 0982XXX. Does anyone ...

Stevens 79 Manufacture Date? - Long Range Hunting Online Magazine

www.longrangehunting.com > ... > Shotguns And Shotgunning (NOT Slugs)
  1. Cached
May 26, 2011 - 1 post - ‎1 author Twelve years ago I purchased a second hand Stevens model 79 pump 12 gauge shotgun with a 30" barrel and full choke. The serial # is ...

Nov 23, 2016 | The Optics

1 Answer

WHERE CAN I FIND STEVENS AND TOOL SHOTGUN PARTS


Beings you didn't give a model number, all I can do is direct you here:

http://www.gunpartscorp.com/Manufacturers/SavageStevensSpringfieldFox-33479.htm

Shotguns are the last catagory.

Oct 07, 2014 | Optics

2 Answers

How do you load a mossberg 88 maverick 12 gauge shotgun ?


this is the same for your maverick 88.

Sep 14, 2014 | Optics

1 Answer

Year of manufacture of shotgun


Brand of shotgun and model or type will help here. different Mfg's have different ways of recording year of Mfg.

Oct 15, 2011 | Remington Sports Remington 12 Ga...

1 Answer

I bought a Remington 870 at Christmas time. The first time i shot it the shells are jamming in the gun. I took it home cleaned it and oiled it real good. Went and shot it again same problem. Either...


If the 870 is a Magnum model it should accept 3" shells. After making absolutely sure you have an unloaded shotgun, both chamber and magazine are empty, empty, empty, proceed with these few checks.

Assuming it may be a 2 3/4' model, have you double checked on the left side of the barrel near the receiver? There will be gauge and shell length stampings on the barrel. If you are jamming 3" shells in to a 2 3/4" shotgun you will get jams as you describe. Look at the empty shell casings if you have any and see if the shell appears to be damaged from the chambered and firing process. This could also indicate you have a improper shell length issue.
If you are shooting reloaded ammo make sure it has been properly re-sized, crimped and reloaded.
sloppy reloading of shotgun shells can cause jams as you describe. Improperly re-loaded shells can also cause leaks of bb's, (shot) in to the receiver and bore area.

Check for a loose bb. or bb's, (shot) in the receiver and chamber area. A lodged bb. in these areas will cause problems you have described.

Run your fingers along the barrel and visually check it for any slight bulge. If you detect or suspect a bulge do not shoot or load the shotgun until a gunsmith or the factory check the barrel thoroughly. If someone had loaded a 20, 16 or similar smaller guage shell in the chamber by accident and the gun was fired it will usually cause at minimum a stressed and bulged barrel. Many times a slight bulge in the barrel may not be visually obvious.

Most of the time if a 12 gauge shell gets loaded behind that one and fired you will have catastrophic failures, i.e. the gun can blow up and cause serious harm, blindness or even death in rare cases to the shooter. Shooters call this a "20/12" catastrophic failure. This type of accident is not to be taken lightly! this is why shotgun shells of different gauges are different in color normally.
Never ever, mix shotgun gauge shells in a pouch or box.

If you pump the shotgun too easily, (i.e. wimpy) it can jam up. Always pump, "rack" a shotgun with vigor. I'm not suggesting abusive action, just don't be slow or overly gentle with the pump action that ejects a shell and reloads the next one. Something related to this is if your action/slide bar is out of alignment or has become torqued out of it's proper alignment this will cause problems as you have mentioned. The action/slide bar is a long single piece of flat metal that is in alignment with the barrel and is attached to the front forearm of the shotgun. This is the flat piece of metal that actually makes the action open and close as you pump the shotgun. There is one on the left underside of the bore and forearm of the shotgun. When you pump the action you will easily observe it moving with your pumping action.

Check how the empty action feels to you. While dry-firing, (using an unloaded shotgun), does the action feel smooth or perhaps, gritty, sluggish, overly tight? If any of the later the you need to double check for debris, shot, excessive old lubrication, gumming of the action, a bent action/slide bar, etc. A normal 870 has a very smooth action.

Also, check the bore for any obvious nicks or obstructions that don't belong there. A good quality shotgun such as your 870 should operate best with very little lubrication. Excessive lubrication over time can cause gumming up of the receiver area. Also, improper lubrication products. Improper lubrication can cause problems you have described.

I am not a gun smith. I am simply an avid gun enthusiast. If you have any doubts as to anything that you observe while performing these basic checks on your shotgun, I strongly advise you to call the factory or take it to a local gun smith. Many gun shops will give your shotgun a courtesy check over and if you don't find a solution, many times they will within a few minutes. Do not be embarrassed to take the gun in to a gunsmith! Trust me, they will most likely treat you and you gun with respect and courtesy. Otherwise they won't be in business much longer.
If the gun shop fixes your problem make sure and purchase some shells and perhaps something else from them. We must support our small business firearms dealers and gun smiths

Hope this helps you!

Feb 02, 2011 | Remington Shotgun Mount 12Ga Lh, B Square...

2 Answers

How do you load a 12 gauge pump action Mossberg (500)? There is no magazine for it, but, is mag ready. How do you manually load?


The loading port is on the bottom of the reciever. You mention that it is "magazine ready"? Mossberg shotguns have a tublular magazine underneath the barrel, surrounded by the action bar and front grip.

Loading the magazine entails holding the shotgun in one hand, taking the shell in the other with the folded end facing the front end of the barrel. Place the shell in the magazine opening (on the bottom) and push it up with your fingers and forward with the thumb of the same hand. It will go completely forward of the silver/blue lifter and stay there when you let go. (the action must be closed to load the magazine).

Alternately, you can open the action and pop a shell into the ejection port on the right side, close it back up, and shoot!

Sep 17, 2010 | Mossberg Optics

2 Answers

I own a Maverick model 88, 12 gauge shotgun. Need plug


the plug is ussaly no more than a wooden dowel that fits inside the spring and is the approx length of the shells put end to end like they would be in the tube

Oct 12, 2009 | Sport & Outdoor - Others

2 Answers

Broken forearm on a mossberg 535 shotgun


I'd be amazed if Mossberg didn't have one available. Give them a call.

Jan 05, 2009 | Mossberg Sport & Outdoor - Others

Not finding what you are looking for?
Sport & Outdoor - Others Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sport & Outdoor - Others Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

16147 Answers

Are you a Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...