Question about Aztech Computers & Internet
Aztech dsl 5005en wireless not working. the led on the modem for wireless also not lighting up.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Reset the DSL Modem and make sure the modem is setup for your DSL account information. You might have to call up your ISP for that information to be added. If that was done prior then the Router has to have the same information user name @ your ISP.net or .com and password. for PPOE. Make sure the router has it MTU set to 1492 for DSL.
1. unplug the modem
2. unplug the router
3. between both of them wait 30 seconds
4. all PCs should not be on
5. plug in back the modem
6. plug in back the router
7. Turn one one PC
8. login to the router and make sure it connects to the internet
Since your using Gig Router make sure that the WAN is to 10 if you have 6Mbps plan 15 to 30mbp plan go to 100 for WAN.
If you're still having issues, then you need 3rd level service tech from your ISP to check the DSL back at the office side to see how that's connecting to your modem. If that checks out okay, then have line tech come out and check the DSL going into the house. If that checks out good then it could be the a problem with the new router you have there you have updated the firmware for it yet?
If you have then the modem could be the problem. These are the steps you need to take to trouble shoot the problem. Check all connections make sure they're plugged in correctly. Make sure all DSL filters are working correctly one bad filter can throw the DSL off. Check each phone connected to a filter to see if its clear.
Posted on Jul 31, 2008
hey there, can u acces the gateway of the router
192.168.1.1 than enter ur login & password
than reset the router to fabric setting when done go back in the router and configure it as u like to have it
Posted on Jan 04, 2009
Darvin, gotta love your ISP. Never fear......
if it isn't too much of a problem (knowing you have wireless setup done already), then do a factory reset on your router ** remember to copy the WEP Key if you have, or recall the PASS PHRASE so you won't have to reset all wireless devices ** Reset is located on back, you need a ball point pen to reach the reset switch.
Reset process: unplug, take ballpoint pen & insert into reset switch & plug unit back in. Sometimes tricky, but you should notice green light goes to yellow/orange upon resetting.
RESET or NOT - you want the Linksys set for ::
Connection Type - AUTOMATIC (for automatic discovery)
Router IP Address - 192.168.2.1
DCHP - ON, Addresses - 192.168.2.100 and allow 5-50 users
(for security, assign the number of DESKTOP + WIRELESS expected users +1, this way you don't get overrun without knowlege)
Take the cable from Aztech ETHERNET OUT to WAN on Linksys. (usually BLUE) (??) not 100% sure as I have the little silver pocket edition of the same Router. - power cycle (turn both DSL modem & Linksys off for 20 seconds. turn on DSL Modem, wait till it's about as ready as possible, turn on Linksys, should only take 20-30 seconds to power up & recognize.
VERIFY SETTINGS: access router - 192.168.2.1, goto STATUS. you should see IP Addressing, SubNet, DNS1 & DNS2 settings. If you do not, then you have no internet connection.
Setup Linksys Router with COnnection Type: PPoE, you will need your ISP assigned ID & Password. Follow all other instructions properly.
If you still have problems, please contact me at 906-495-1707 or via Yahoo IM firstname.lastname@example.org or through this website.
Posted on Jan 13, 2009
SOURCE: DSL light not stable
Well, u can exchange with other model whether the issue will occur or not. If yes, then definitely is the line problem where u need to check with your ISP.
If u do not has other modem to test, then u probably need to access your modem and look for the line/modem status.
Posted on Sep 15, 2009
Tips for a great answer:
Nov 22, 2012 | Computers & Internet
Nov 22, 2012 | Computers & Internet
Sep 10, 2011 | Computers & Internet
Jun 18, 2010 | Aztech (090301) Modem
Sep 15, 2009 | Computers & Internet
Jan 04, 2009 | Linksys Wireless-G WRT54G Router
Jan 04, 2009 | Siemens SpeedStream Modem (4100) (SS4100)
234 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: