Question about Samsung HCN436W 43" Rear Projection Television

1 Answer

Samsung sp43w6hpx/xeu my tv has turned into 3d???? can anyone help the picture has shadows and its a yellow color...i can think of what has caused this one day its ok the next i switch it on and its this has happened!! weve had the tv for 4years now so the warrenty has gone and i think that there is still another 4 years left in it....PLEASE HELP!!

Posted by on

  • Anonymous Jan 28, 2009

    MINE HAS A RED GHOSTING HAVE TRIED CONVERGENCE TO NO JOY CAN ANYONE HELP.

  • tommalc849 May 05, 2009

    ive been into service manual tryed to pull the red and blue in but no joy now when i try pfocus it says no sensordata . had tv guy out he said it needs 2chips . is there a repair manual also what chips they are the tv guy is looking £200 to fix it i just bought a new tv lgpq600 42 so the samsung is for bedroom is it worth fixing as i paid £1500 for it 5years ago

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 137 Answers

Yes you must go to menu and set the convergenge. It is easy. If it doesnt tune in or set to be ok you must get somebody to set convertions manualy thru service menu.

Hope it help

Posted on Jan 24, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a couple issues. First, my screen is yellowing from the sides inward, and second, the picture seems a bit "blurry", even though it's set to 1080i and getting a signal from an HD...


The tv have a problems known as a convergence pictures problems it is dead.Tv have any colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than the tv convergence board it is dead and the causes all of these problems.The tv convergence board must have be repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.The tvs shops will cost u like $300-350 for parts and labors.

Aug 31, 2011 | Samsung HCM5525W 55" Rear Projection...

1 Answer

Picture seems to be offline( curved down) also everything seems doubled and you can see the red, yellow and blue colors of the lenses on the screen


Tv have a problems known as a convergence problems it is dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than the board that call the convergence board it is dead.This convergence board require service must be replacing parts 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board,to solved the tv picture convergence problems mis alignment.The tvs shops,will cost u like around $300-350 for parts and labors.

May 28, 2011 | Samsung HCM4215W 42" Rear Projection...

1 Answer

Blue shadows and a yellow and blue arc acroos the bottom of the screen


Tv have a problems known as a convergence problems it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board it is dead.The tv convergence board must require replacing 2 STK convergence ICS and some or all of it resistors too.To fix the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Mar 02, 2011 | Pioneer SD-582HD5 58" Rear Projection...

1 Answer

Having trouble with samsung projection tv / sp43w6hpx/xeu. done manual convergence and got the picture and colour nearly right but across the top half the tv the picture is bend upward/ what kinda part...


Look for 2 big black ICs they will have the Part number on them,example STK392-110
Mats Electronics has them replace Both ICs. 1-800-628-1118 also in front of ICs is 2 resistors low ohm 2.7 or 3.9 replace them.

Mar 01, 2011 | Samsung Televison & Video

1 Answer

What causes the yellow and blue ghost on tv, and how to solve it. It is on a Toshiba rear projection


The problems ur tv have is known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look like.The tv convergence board have dead 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced these parts on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.

Oct 25, 2010 | Toshiba 55H70 55" Rear Projection...

1 Answer

The top of the screen is yellow color then drops down in a swoop and more yellow and blue. otherwise picture is good, pushed the magic focus but it did no good. thanks for any help


The magic focus button don't work.The tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows or 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced on the tv convergence board to solved the tv convergence picture problems.The shop,will cost u $300-350 for parts and labors.

Oct 15, 2010 | Hitachi 65TWX20B 65" Rear Projection...

1 Answer

PICTURE IS BOWING INWARD AND THE COLOR . LIKE PERSON FACE IT WILL HAVE A SHADOW OF RED, BLUE, GREEN, YELLOW


Tv have a problems known as a convergence problems,it dead.Colors lines R,G,B mis alignment,have colors shadows or 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts are dead,must be replaced on the tv convergence board to repair the convergence problems.The shop,will cost u $300,350 for parts and labors.

Sep 14, 2010 | RCA HD52W58 52" TV

1 Answer

Samsung SP43W6HPX


i have the same problem i turn it on the red light just flashers on and off can anyone help solve this rthtank you

Mar 04, 2008 | Televison & Video

1 Answer

Samsung sp43w6hpx/xeu


Convergence is out. Go to service menu and set it.

Dec 23, 2007 | Samsung HCN436W 43" Rear Projection...

1 Answer

Samsung SP43W6HPX\XEU Rear projection


HLP, HCN HL-S The Start-up Problem or/and
3 LEDs in the front blinking.

Unplug the set, pull out the lamp module (not all the way - leave it on the track) and push it back in.

Power issues (Tv not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.

Oct 25, 2007 | Samsung HCN4226W 42" Rear Projection...

Not finding what you are looking for?
Samsung HCN436W 43" Rear Projection Television Logo

Related Topics:

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...