Question about Bionaire BT45RC Tower Fan

Open Question

Is it normal for the tower fan to be alittle loose at the base

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My bcm740b humidifier fan isn't moving. Advice

Your problem is that your fan motor needs to be lubed. The bottom bearing on the motor can be lubed by taking the fan tower off the base and turning it upside down. Using a flashlight, you should be able to see the "bottom" bearing of the fan motor. I usually just put a drop or two of Mobil 1 or some other synthetic motor oil on the bearing and let it sit inverted for a few minutes so the oil flows into the bearing. If you are lucky, this will be sufficient and your fan motor will start running again....If not, then the "top" bearing ( when sitting in a normal position) right under the fan blade will also need to be lubed...This will require disassembly of the fan tower so you can access the bearing with some spray lube, then reassembly of the tower which can be tricky so you don't break any connectors that keep the whole assembly together. Try the bottom bearing first and save the other one for the summer!

Jan 01, 2018 | Humidifiers

1 Answer

How do I clean my clean living tower fan?

Usually there would be a few screws in the base that need to be taken out and the outer case pulls out. This will expose the fan and filters inside. Hopefully that will allow you to clean the inside. Would not spray any cleaning agents. Just a light vacuum and wipe with clean moist cloth.

Aug 27, 2014 | Tower Dryers

1 Answer

I have a aloha breeze 32" tower fan. The base

Unfortunately from the manufacture sorry

Feb 21, 2013 | Dryers

1 Answer

Model 29006 - remote cannot control fan speed anymore, even with new 9V battery in it. Where can I get info for repair or replacement?

It is possible that your remote control unit is faulty if the fan can be adjusted on the set. If so you can open the remote and check for loose components, normally the crystal or the controller IC can be loose . use a good touch up soldering job . If not try to get help from any electronic service shop as they may assist with the remote controller work. But take your fan alonf to confirm the service. Hope you try this out. Good day

Aug 14, 2010 | Tower Aloha Breeze Fan

1 Answer

I haven't used it in one year and now it won't turn on. (Bionaire BT46R)

The motor may just be stiff, or seized. take the cover off, and try spinning it with your hand. then plug it in and try it. if it doesn't work, then it's probably done. I just fixed mine today, but the base on mine was just loose. but it shouldn't be too hard to take apart.

Aug 13, 2010 | Bionaire BT46R Tower Fan

1 Answer

Tower fan

Go to any auto store or hardware store (Lowes/Home Depot) and buy a small assortment box of screws for $5.00. They will have he right size in the assortment. Manufacturer should have a manual on-line.

Oct 14, 2008 | Aloha Housewares Breeze 29" Tower Fan

1 Answer

Black & Decker BDTF1010B Tower

when you take all the screws out slide the back down. there is a screw at the bottom holding it from slideing the 9th screw so to speak. you have to take out the u shaped pin on the rod once that u shaped pin is out thats where you will find all the screws to the bracket holding the moter in place take all those out too. it seems like alot but it is really not.

Jul 12, 2008 | Black & Decker BDTF1010B Tower Fan

2 Answers

Tower fan 07586 parts (screws)

I have an Aloahbreeze Tower Fan. The remote control does not work,I put new batteries in and it still does not work. I am disabled and need the remote. It was a gift, as I have no income, so I cannot buy a new Tower Fa. Thank you, Sheila Pike Model No. 84001(FZ25-)

May 29, 2008 | Tower Aloha Breeze Fan

1 Answer

How do you open up a BDTF101B Tower Fan?

first you have to remove the two plugs on top behind the buttons remove the two screws next you have to remove the base stand and their is one screw you have to remove then you can remove the front cover and you can get to the motor and fan.

May 29, 2008 | Black & Decker BDTF1010B Tower Fan

Not finding what you are looking for?
Bionaire BT45RC Tower Fan Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bionaire Dryers Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Bionaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides