Question about Kenmore Elite Oasis 27052 Top Load Washer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
F-51 ERROR CODE IS DEALING WITH THE SPIN CYCLE. THE CONTROL DOES NOT DETECT IT SPINNING.THE RPS SENSOR ON THE BOTTOM OF THE UNIT NEEDS TO BE TAKEN OFF AND PUT BACK ON ABOUT 10 TIMES. SOUNDS WEIRD BUT USUALLY FIXES IT. THEY DO HAVE A KIT ALSO FOR THE RPS TO BE REPLACED. UNPLUGGING FOR A FEW HOURS IS A TEMP FIX.
Posted on Aug 12, 2009
Re-balance the load, and re-try.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
Posted on Sep 11, 2010
SOURCE: Hello, I have a
The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. Check to see if the basket spins freely. If not, you could have an item caught between the outer tub and the inner spin basket. A toy or other item underneath the washer could also prevent the basket from spinning and would result in this F50 code.
If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Posted on Sep 25, 2010
Hello, Welcome to FixYa.
Hopefully the info below will supply you with the assistance to get the top up (and more) on the Oasis washer.
The first thing I'd do is this...
**unplug the washer...most important and safety first**
1) this is best done with a puddy knife or something similar to depress the clips on both sides, i.e. (these tops are quiet heavy and the lid has heavy springs so be careful...leave the top in the "up" position until you can rest the entire top against a wall or something to allow you to work un-impeded as shown below as well )
Lean it back if possible...watch that lid again, those springs are heavy duty.
Once to this position you should be free to investigate or perform whatever service you had hoped to perform.
Let me know if you have any questions or if anything is not clear and I'll see what I can do. Good luck.
Thank you for choosing fixYa today, please take a moment to rate the info and the assistance you received here at FixYa today.
Posted on Oct 29, 2011
Tips for a great answer:
Aug 19, 2014 | Sears Washing Machines
Sep 06, 2011 | Kenmore Elite Oasis 27052 Top Load Washer
Jan 11, 2011 | Kenmore Elite Oasis 27052 Top Load Washer
May 17, 2010 | Kenmore Oasis HE 27082 Top Load Washer
May 11, 2010 | Kenmore Elite Oasis 27052 Top Load Washer
May 04, 2010 | Kenmore Elite Oasis 27052 Top Load Washer
Feb 08, 2010 | Kenmore Oasis HE 27082 Top Load Washer
Jan 28, 2010 | Kenmore Elite Oasis 27052 Top Load Washer
Nov 21, 2009 | Kenmore Elite Oasis 27052 Top Load Washer
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: