Question about Sewing Machines

Open Question

Husqvarna huskystar c10 buttonhole - Sewing Machines

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 192 Answers

SOURCE: Buttonholes

Put on the C foot. Select the buttonhole stitch. The machine will start sewing in the bottom left corner of the the buttonhole. Sew the length that you need, press and release the reverse button and sew the right side of the buttonhole. When you get back to the bottom, press and release the reverse button again and the buttonhole will be finished and the thread will tie off and the machine will stop. If the buttonhole is what you want, press and release the Stop button and the machine will repeat this buttonhole as many times as you need until the machine is turned off or the Stop is pressed again. When repeating, you need not press the reverse. Just press down on the foot control and continue until the machine stops by itself.
If you don't like the first one, just sew another one using the reverse button to set the ends.

Posted on Oct 02, 2008

  • 244 Answers

SOURCE: I have recently changed the needle on my Huskystar

check that your needle is properly seated, and aligned!
and is the right type!
good luck!

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual free download


Hello
It is available as follows
Model Lang Title Date Huskystar 207,Huskystar 215 Svenska Instruktionsbok 04/28/2010 0MB Huskystar 207,Huskystar 215 Espa?ol Gu?a del usuario 02/01/2010 1MB Huskystar 207,Huskystar 215 English User's Guide 11/24/2009 1MB
from this link
http://manuals.husqvarnaviking.com/

Hopefully this will be of some help.
Sewingirl/

Jan 28, 2014 | Husqvarna Huskystar 215 Sewing Machine

1 Answer

Huskystar 219 224 type buttonhole


Attach the buttonhole foot. Then pull down the arm to interact with the foot. It is next to the presser bar to the left. Select buttonhole stitch. Start sewing. It should stitch all four sides in one step.

Oct 13, 2013 | Sewing Machines

1 Answer

Buttonhole Husqvarna 6430. When it is supposed to sew the right side of the buttonhole it just goes back over the left side. The machine doesn't do the two buttonhole lines next to each other . An


the machine probably needs to be serviced to see why it's not making
a buttonhole and see if the gear or cam for the zig zag stitch is
worn or damaged.

Jan 30, 2013 | Husqvarna Sewing Machines

1 Answer

My Huskystar C10 Bobbin keeps popping out. I followed the instruction manual's directions to place it back in after cleaning but it will not stay in place. Help!


If you have any rough spots on the outer edges of the bobbin case, usually caused by the needle going through it, you will continue to turn it until the rough spots are smoothed off. I scrape the rough areas with a knife so the edges are smooth and uniform.
You may want to take it to a repair center to have this done. Don't be surprised if they recommend replacing the bobbin case. That is the quickest and cleanest fix.

Oct 15, 2011 | Husqvarna Huskystar 215 Sewing Machine

1 Answer

Husqvarna Huskystar 207 Sewing Machine not stitching. It won't pull the bobin thread up to sew.


Be sure not to use Singer Needles. They are longer than standard needles. Don't know if this helps, but I did this once on my Huskystar 207 and that is what happened. It also damaged the bobbin thread.

Fairleigh

Sep 18, 2011 | Husqvarna Huskystar 207 Sewing Machine

1 Answer

Sewing Machine Stops


this sounds like its set for zippers check settings!

Dec 09, 2008 | Husqvarna Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...