Hi! I use bellsouth dsl on my Medion desktop.
Got a small Acer notebook id ike to add to the dsl network but - do not know how to do it. Can two wires (cables) run from one modem to both computrs? Can iT be wireless?? If so how??
Im using a westell 6100 but also havwe as linkey for a VIOP tha hasd been unplugged ad i dont know how to RE-plug to use it or the VOIP.
(i jus pay for th Vonage & HOPE to get that fixed too)
You will need to connect a router to the Westell in order to use more than one computer with your dsl. That modem will need to be put in bridge mode in order to allow it to work with the router.
Call ATT/Bellsouth support and tell them you need to setup your modem for bridge mode and connect your Linksys router.
A power outage caused server to shut down. It will not restart. The lights are amber, top green...
(More)
A power outage caused server to shut down. It will not restart. The lights are amber, top green light comes on for a split second then changes to amber. Fans are running, green light is displayed on motherboard. Just no boot.
I could tear down and rebuild a normal pc with my hands tied together with an IDE cable but when it...
(More)
I could tear down and rebuild a normal pc with my hands tied together with an IDE cable but when it comes to this IBM server architecture, the more I read- the more lost I get.
I have a rack and a tower chassis that I recently purchased and I would like to make them error-free and optimize them for the the applications I intend to use them for.
The rack-mount runs like a top and acts as my primary DC but there is nothing standing between it and a complete crash. The tower (X series 232) is having a hard time seeing hard drives and I'm getting errors like "No SCSI Device" and "No SCSI BIOS found!" Although it is there when Server 2003 starts.
I'm looking for someone to walk me through a complete setup.
im currently sharing internet connections with my ps3 through an ethernet cord and laptop (usb...
(More)
im currently sharing internet connections with my ps3 through an ethernet cord and laptop (usb modem)and it works. my upnp use to say not available now its available. the thing is my nat type is 3. what can i do to change it