Question about Home

1 Answer

Price Pfister Tub/Shower Diverter and Hot/Cold Stems question

My tub/shower uses a Tub/Shower compression Diverter part #: S10-385. I now need to buy the hot and cold stems. So, which is the correct part # for the hot and cold stems? 1) Is it the 910-374 ? 2) Is it the S10-375? 3) Is the S10-375 discontinued? 4) Does the 910-374 replace the S10-375, but BOTH will work? 5) Also, does the 910-381 Diverter replace the S10-385? Is the S10-385 Diverter discontinued? My local Lowes store still carries the S10-375. Can I use that part for my hot and cold stems? Please answer all 5 questions so I can understand it all. And please let me know if the 910-374 and the S10-375 are the SAME part and are interchangeable.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 203 Answers

Price Pfister 1-800-732-8238

Posted on Apr 01, 2017

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bloues
  • 56 Answers

SOURCE: The cold water stop working in my shower. I have a

Two posebel coses i can think of.

1. the taps plunger is stuck in the off posision or 2. there is dirt loged in cold side of tap.

take off head part of cold tap and c if mabe the rubber is stuck or if u maby see some dirt in the tap ietself

hope it helps

Posted on Jul 20, 2010

packrat1948
  • 528 Answers

SOURCE: Have a shower only no tub. replaced both the hot

Take the shower head off and see if the pressure is better or the same. If it is the same then you will need too look up-stream for blockage in the water lines. If it is better then replace or clean out the holes in the shower head. It may also have a filter screen before the shower head.

Posted on Apr 12, 2011

Testimonial: "I wasn't sure if that was the problem since I had just recently put a new shower head on, but it was the problem. Thank you for your help. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tube and shower installation. Shower head dribbles water while filling tub. I used 1/2 copper and a shark tooth 1/2 copper to 1/2 FIp for my tub spout. I believe the fitting is restricting the flow t


It sounds like the diverter is not fully opening to allow the water to run to the spout. If the diverter is in the wall, perhaps there is a seal in there that needs replacing. If it is in the spout, just replace the spout,

Nov 24, 2014 | Price Pfister 8P8-PDKK Pasadena Single...

1 Answer

The hot and cold are reversed on our single handle shower (no tub faucet -- shower only)


Hot on left.
Cold on right.
Some single handle faucets have bleed-over where both hot and cold enter mixing valve each time handle is turned on, even when faucet calls for just cold or just hot.
Otherwise maybe a do-it-yourself plumber got pipes backwards... or maybe the tub used to be on other side of wall, and tub was moved during remodeling but pipes were not changed.

To fix problem:
First of all, turn off shower faucet. Turn on Hot at sink and put ear against shower faucet listening for sound of water flowing through the mixing valve.
If mixing valve is working fine, you need to open wall and investigate more.
For example if you have access door, reach in and feel which pipe is hot.
Pipes might need to be reversed if problem comes up in home inspection, otherwise the problem will not harm anything.

Feb 19, 2011 | Price Pfister Plumbing

2 Answers

Price Pfister tub/shower facuet needs much force turn on and off


put water off at mains . step 1.-open your i box mixer. step 2-u will see a 2 mm pin. mabe yours looks difrent. bt there were u change between bath and shower that button... that nob wil have a pin at the back. try to put q20/oil in there or sope. if that dosent work u will have to get a plumber in to unscrew the mixer and clean out the inside. not recomended if not a plumber bt if u do wane try it ur self and the sope and oil dident do the job let me know im a plumber will walk u threw it

Jul 04, 2010 | Price Pfister 07-81PC Savannah 2 Handle...

1 Answer

I have a older Delta shower head/tub combination with scald protection. It leaks from the tub diverter. Where should I start?


I'm assuming that you have a three handle faucet. You need to remove the diverter from the faucet body and while your at it remove the hot and cold stems from the valve body (the parts are inexpensive). Remove the seats inside of the valve body towards the back, replace with new ones. If stems are in good shape, just the washers and seats need to be replaces. If the brass on the diverter or on the hot or cold stems is pitted or marred, then replace the whole thing. The parts should be readily available at most plumbing supply places.

Nov 27, 2009 | Bath Unlimited DELTA INNOVATIONS TOWEL...

1 Answer

1 HANDLE TUB/SHOWER. WHEN YOU TURN THE SHOWER ON


The diverter is worn and needs to be replaced.

The diverter is the lever/button you pull/push to switch from shower to tub. When they get worn, they require more pressure to seal properly and divert the flow.

Aug 06, 2009 | Delta T13420 Chrome Classic Single Handle...

1 Answer

Price Pfister Shower--No water to shower


Does the tub spout water flow stop when the shower knob is pulled?

Was the systems pipping flushed before the shower head was installed?

It may be clogged, remove the shower head and then attempt to operate. If it is clogged you will see debris trapped in the screen at its connection point. The shower head can be disassembled - cleaned - reassembled

Is the shower head an adjustable type, that may be in the off position?

Good luck
Aduz

Mar 26, 2009 | Price Pfister Hanover 950-102S Soap &...

1 Answer

My 3 handle bathtub fauset [price pfisher] cycles hot and cold


You will need to either replace center "shower diverter"assembly or a quicker fix would be to remove old tub water fill spout and replace with a "pull up diverter knob" type water spout. Cost about 10 dollars Hdepot Pull Knob to divert water to shower when showering.

jthomefix

Mar 15, 2009 | Price Pfister Ashfield Widespread Bathroom...

1 Answer

Shower/spout


The valve is installed upside down and needs to be reversed. There is a diverter in the valve that gives the spout priority. When the valve is upside down it gives the shower head priority. Thats why it runs without the diverter being activated. You will need to get in the wall from one side or the other. Cut the valve out and either flip the faucet Or change the direction of the diverter depending on the style of valve.

Good Luck, Phil

Dec 10, 2008 | Price Pfister 01-111 Shower Head, Tub...

Not finding what you are looking for?
Home Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

Donni Steen

Level 3 Expert

659 Answers

Tom Chichester

Level 3 Expert

37979 Answers

Brad Brown

Level 3 Expert

16406 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...