Question about Sony PlayStation 2 (PS2) Console

1 Answer

Controller port1 its not working

Posted by on

  • Danster01 Jul 31, 2008

    my controller stopped working. We cleaned the connections, checked the cable. We get a message dualshock not connected. We tried everything but buy a new controller. Please help

  • joshi14 Dec 28, 2008

    My controler port 1 doesn't connect it make a sweaky noise when I try to connect it. Can you email me back as soon as possible

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Check if connector has been pushed inside machine if this has happened open case and remove port panel either replace poet panel for around $10 on ebay or take a heated soldering iron and heat it in its original place to mold it back into its seat then let cool,otherwise check for hair and dust in connectors and try swapping controllers

Posted on Aug 09, 2007

  • WIZARD_OF_OZ Aug 09, 2007

    oh when you remove the port panel just check to see if the flexi cable hasnt cracked or come adrift clean all conectors too

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hdmi port1 not working trying to install apple tv


Check input with other known good source. If still not working replaced the main board. panasonic call it the A board.

Aug 30, 2011 | Panasonic VIERA TH-65PV500 65 in. Plasma...

1 Answer

I need to bridge 2 belkin N300 routers


The easiest way to bridge 2 routers is to turn off the DHCP and NAT on one of them, and connect them from port1 to port1. This of course reduces the number of available ethernet connections, but it does bridge them together... basically it turns one of them into nothing more than a hub/switch.

Jun 04, 2011 | Belkin Surf N300 Wireless Router...

1 Answer

My wireless connects to the internet but i cannot ping or recive packets


hi

there are a few steps involved

1. check to see the ip address provided to you by the ISP and group your ip address range to the same range
2. check to see if you require any DNS server addresses
3. check to see when the router is connected at the internet port from the modem then is it having signal at the port numbered 1 only or is there no signal at all ports 1-4
4. if there is signal at port1 but not on other ports then instead of connectng the cable from the modem at the INTERNET port connect it to port1 and it will be distributed to all the ports 2-3 also there will be wireless connectivity too

cheers
Pls rate if this was any help

Jul 12, 2009 | Dell Latitude D600 Notebook

1 Answer

Can't get the other computer to connect to the internet


there are a few steps involved

1. check to see the ip address provided to you by the ISP and group your ip address range to the same range
2. check to see if you require any DNS server addresses
3. check to see when the router is connected at the internet port from the modem then is it having signal at the port numbered 1 only or is there no signal at all ports 1-4
4. if there is signal at port1 but not on other ports then instead of connecting the cable from the modem at the INTERNET port connect it to port1 and it will be distributed to all the ports 2-3 also there will be wireless connectivity too


cheers
pls rate the query too if this was any help

Jul 11, 2009 | D-Link Computers & Internet

1 Answer

Connecting 2 wireless routers


As a wi-fi technician, it is not recommended to extend the wireless signal using another wireless router. Having 2 wireless routers will just cause conflict to your wireless network. If you still have time, please replace the router with a Wireless Access Point (WAP54G). WAP is easy to setup. Just plug it to one of the ethernet port on the back of your router and run the setup CD that came with it, that's it. It'll extend your signal.

If your main concern is just extending your wireless signal to another far place outside your house, Wireless Range Expander (WRE54G) can also be used. It is a similar device like an Access Point but its signal extending capability is more powerful than Access Point. Its also easy to setup, just the setup CD that came with it.

You can also contact the Linksys toll free tech support # at 1800-3267114 if you wanna resolve the issue over the phone. Hope that helps.

-Regards

Oct 14, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Hi i have a problem connecting the front pannel mic and standard audio connections to my winfast k8m890m2ma motherboard the manual shows where the 8 pin "front audio connector" is like this...


It is a bit of a problem when you have single connectors but here goes. You use the Front Audio connectors. The manual says you have :::.:
If you turn the board round until the dots are the same way round as above. Working from left to right.
Bottom row. MicIn, MicBios, SpkoutR, empty,SpkoutL
Top row GND, empty, returnR, blank space, returnL. Now this is the tricky bit. Try the power if it works OK. Because the board and the case manufacturer work to different descriptions, try this as an alternative. You may have to swap over the two connectors for GND and Mic Bios.

Mar 10, 2008 | Computers & Internet

1 Answer

My data cable not working


try the other port if it not work uninstall the programme aand reinstall then it will work properly

Nov 28, 2007 | Cell Phones

2 Answers

Routers


I don't understand what you want to do. I need specific details of what you want your network to do.

Nov 02, 2007 | Computers & Internet

Not finding what you are looking for?
Sony PlayStation 2 (PS2) Console Logo

Related Topics:

1,142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Zhenya Ogorodnikov

Level 2 Expert

218 Answers

shaun taylor

Level 3 Expert

1527 Answers

juanmireles1

Level 2 Expert

226 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...