Question about Fujitsu Office Equipment & Supplies

1 Answer

Error J1 What does error J1 mean

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 104 Answers

Hello Sharon,

When a document jam occurs, "J" and "1" will display alternately on the function number display panel of the scanner.Please perform the following:

  1. Remove all documents from the ADF paper chute.
  2. Open the ADF while pressing down the ADF open lever. If you are using fi-6130 with the imprinter option attached, please open the imprinter and then open the ADF.
  3. Remove the jammed papers from the ADF.
  4. Close the ADF pushing the center part of the ADF carefully.

If document jams occur frequently, please check the followings:

1. Do the documents satisfy paper specification?

2. Have the documents been jogged?

• Align the edge of documents for stable paper feeding.

• Remove documents with crease or dog-ear.

• Scanning different width of documents may cause skew and result in paper jam.

3. Are Chuter Unit (ADF paper chute),Guide P ASSY (Sheet guide), Feed roller cover (plate guide) and Brake roller cover installed correctly?

4. Clean the Feed rollers, Eject rollers,Plastic rollers, glass surface and paper feeding surface, and see if the error is

resolved.

5. Replace Pick roller or Brake roller, and see if the error is resolved.Check the consumable counter from the TWAIN driver screen or from the built-in Maintenance mode. When the counter exceeds the values, replace Pick roller or Brake roller.
6. If the issue still persists, then you are recommended to contact the nearest Fujitsu service center for further assistance.


Hope the above information is helpful.


Thanks & regards,
ScanCare

Posted on Nov 07, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a xerox workcenter XD102 with a J1 error. What do I need to do?


J1 code on the XD100 series means that your toner cartridge is empty. You will need to order in a new one or have your existing cartridge refilled. Refills run about $60.00 and new ones are in the $100 to $125 range.
Precisionroller.com has a very good remanufactured unit for $46.00
http://www.precisionroller.com/search.php?q=xd100+toner

Good Luck and Thank You for using Fixya.
WheatlandServices

Dec 22, 2010 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

What does the error code J1 mean?


This means its time to replace the Toner cartridge.

Oct 07, 2009 | Xerox WorkCentre XD125F All-In-One Laser...

1 Answer

What is error code J1


J1 means your machine has detected an empty toner cartridge.
You may be able to shake it and get some more copies out of it. but on that machine J1 is pretty accurate.

Apr 11, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

J1 Error, Changed a brand new factory-sealed toner, still getting J1 Error


Make sure you have the right code: J1 or J2.
one is for the drum and the other is for the ink.
Make sure the toner unit is for this model and not for a different model.
If the old modual is still available, check the connectors at the back and see if they are the same.
If anything else Call Xerox for repair. If the cartridge was bought through Xerox have your reciete available for warrenty.
If repairs still need to be made, A Xerox service call may be needed in order to fully repair the copier and warrenty the cartridge.

Nov 06, 2008 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

J1 error code


J1 is detecting either a low or out of toner condition.
Maybe just need to have the cartridge shook, replaced or it could lastly need the toner sensor replaced.

Mar 07, 2008 | Xerox 3001 Copier

1 Answer

Help


There is a gear on the end of the fuse that is bad.
Google a business called The Parts Drop.
You can order that part there, less then $20 from them. No I do not work for them LOL, But deal with them often.
If you need instructions on how to replace that gear let me know.
It's not difficult to replace. And that is the problem. Guarantee it 100 percent.
J1 is a different issue. J1 means your out of toner.

Dec 20, 2007 | Xerox WorkCentre XD125F All-In-One Laser...

1 Answer

Keeps showing J1 error, toner light is flashing


The J1 error means the toner cartridge needs to be replaced. Since you just replaced the cartridge, you should remove the cartridge and repeat the following steps.. Shake the new toner cartridge horizontally four or five times and then remove the cover. Slide the new toner cartridge in until it locks in place. It sounds like the cover may still be on the cartridge.

May 14, 2007 | Xerox WorkCentre XD103F All-In-One Laser...

1 Answer

XD103F copier keeps showing J1 error, toner light flashing


J1 means paper jam...so find it where the paper jam ecsactly...thanks

May 14, 2007 | Farenheit DVD34 Car DVD Player

Not finding what you are looking for?

Open Questions:

Office Equipment & Supplies Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

5126 Answers

Tony

Level 3 Expert

2600 Answers

Jax Planet
Jax Planet

Level 2 Expert

922 Answers

Are you a Fujitsu Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...