Question about Office Equipment & Supplies
Error 8528 on Oce 300
This error will be caused by a jamb inside the cutter assembly of the lower roller drawer. Remove the two black Torx screws at the left and right sides inside the lower paper drawer. Next remove the galvanized cover. You should then be able to see the edge of the paper. Grasp it firmly with a pair of needle nose pliers and pull straight up and out. Clear your errors and commence printing.
Posted on May 03, 2013
The system reports this error as a safety interlock problem for the fuser section. Either the plunger switch has failed, or there could be an issue with the connections on the fuser itself on the right hand side. Ensure that the system is completely powered off and unplugged from the wall before you go poking around inside. You are dealing with high voltages. There are 4 power connections to the fuser. Check them with a pair of pliers to see if they are seated properly and locked in place. If they come off easily or you see anything burnt on the insulators, call an authorized Oce technician. the connectors and entire fuser may have to be replaced.
Posted on Apr 25, 2018
Need service manual oce colorwave 300 emailme to firstname.lastname@example.org
Posted on Nov 04, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 17, 2018 | OCE Office Equipment & Supplies
Apr 19, 2015 | Office Equipment & Supplies
Jul 31, 2014 | Oc Plotwave 300 Developer
Mar 11, 2012 | OCE Office Equipment & Supplies
Oct 31, 2011 | OCE 3140 Copier
Jul 26, 2011 | Office Equipment & Supplies
Jan 27, 2011 | Office Equipment & Supplies
Dec 10, 2009 | Office Equipment & Supplies
1,150 people viewed this question
Usually answered in minutes!