Question about Zhone 6211-I3-200 Router

2 Answers

Ports wont open.

Well when i try to connect to my bank account it tells me it could not connect. so i ran diagnostic and it says unable to connect to HTTP, HTTPS, FTPS. I am good with comps but havent completley figured out routers yet. when i try to connect to it wont let me do that either. Im so fustrated so can anyone please help me?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers
Re: Ports wont open.

Hi, With a Xhone 6211-13 ADSL2 rOUTER, assuming that there is no firmware/hardware problem and that you have an active Internet account with your ISP, you have to connect the router directly to one of your PC (where you will do the configuration)(not through a switch or hub) and manually configure the PC's network interface: IP address -; Subnet Mask -; Default Gateway - Check with your browser if you can already access the net, if yes then you have to probably set all your PCs to manual network config by just changing the last digit of their IP add. If still a no go, then.... log in to your router; username & password are both admin (default not unless it has been changed); at the Web Interface Home Page/Paradyne ADSL CPE Homepage check the general status & WAN settings. There would be indications that you are connected to the net. If you still cannot access the router (albeit being directly connected to it via a lancable, then check router's cable, if good but still no internet, then something is wrong with your router. Try hard reset (small button between LAN and Power at the back of the router, press for about 5 seconds or until it has re-initialize. Try again in your PC's browser, if good, try internet browsing, if no go then something is wrong with your router. Hope this gives you some idea. Good luck and pls post again how things turn up. Kind regards.

Posted on Aug 09, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Ports wont open. - Zhone 6211-I3-200 Router Routers

How to open ports in my router

Posted on Aug 06, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Trying to set up xbox live for fifa 12 unable to get connection from internet to xbox live telling me I need to open several ports etc.Can anyone help

Check with your router manufacture on how to log in to the router.

Once you have logged in,check that upnp or universal plug and play is checked to on.
This should allow x box to work through the router.

Oct 11, 2011 | Netopia 2247NWG-VGx Wireless Router...

2 Answers

Unable to connect wireless network to Blu-Ray player


Jun 08, 2009 | Routers

1 Answer

Cant connect to xbox live

make sure that your xbox is acctually getting an ip address, by default it should be a 192.168.0.xx number and the gateway should be
If however your xbox tells you that its ip address is 168.xx.xx.xx (a private ip address) or if it is simply it would sugest a cabling problem.
However if the network troubleshooter finds no faults and you are still unable to get into xbox live try setting up a PPPoE connection using the username eircom and broadband1.
Alternatively,If you click on Firewall in the Netopia admin page, and set the security level to Low, xbox live would suddenly start to work.
******Also add UDP ports 88 and 3074 if nothing works.On a netopia 3347 you can get this option in the NAT option.U have to enter the port numbers and the service name(xbox).
Hope it works for you.

Apr 05, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

Im trying to hook up my xbox and get on the internet by using a linksys

Physically connect the XBox to one of the LAN connection of the router or be connected wirelessly.

If unable to connect to the Internet open these ports using the router under virtual server or port forwarding:

TCP 80, 3074 and 53

UDP 88, 3074 and 53

Note: Also the IP address of the XBox should be open to the section.

Mar 08, 2009 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

1 Answer

Still Can't connect

I had same problem. I ran all the steps again but this time i DIDNT clone, and it now works fine.

Oct 30, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Gud day

Select the payment option in your fixya profile to receive through check.

Fixya send you money through check, then you can deposit your check in the following bank:

In BPI bank: you should have current account or $ account with minimum of $500.00
In Banco DE Oro: you should have current account or $ account with minimum of $500.00

In PNB: You should have a current account or open account with minimum amount of P5,000.00.

for me PNB is good and cheap.

After you have deposit your check, you have to wait for maximum of 45 days bfore you can withdraw the money.

so far only this bank can deposit check.

For fast banking ..recommend to open account in the union bank (EON VISA CARD) then register in paypal, this method is cheaper and very quick.


Jul 08, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

Connection for Ps3 thru netgear router

Make sure that you NAT is open to your PS3. To open it, you need to forward some ports. Call up PS3 and ask them what ports are needed to be forwarded. Then, go and do the adjustments to your router.

Mar 23, 2008 | NetGear WGR614 Wireless Router

1 Answer

Connecting to World of Warcraft Server

You need to disable UAC in Vista. User Account Control
This is the bit of Vista that gives you all the annoying pop ups asking if you want to do this etc.

Feb 25, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

Router cannot connect to servers

The ports that need to be open to connect to the game server are fowarded to your machine and can't be used by another connection. You'll have to release the ports with the router configuration utility in order for another machine to use them. Better still see if you can find out what range of ports the game can use and forward a different set to his machine. Then you can both connect at the same time.

Jan 18, 2008 | Routers

2 Answers


You might try removing any firewalls that might be installed such as Norton. I have seen Norton, as well as other firewalls, get corrupted and cause problems like this. If that is the case, try starting Windows in safe mode with networking and see if you still have the problem. If not, it is a firewall issue.

Sep 11, 2007 | Zhone 6211-I3-200 Router

Not finding what you are looking for?
Zhone 6211-I3-200 Router Logo

680 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zhone Routers Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Ed Mac

Level 3 Expert

709 Answers

Are you a Zhone Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides